Numerical simulation of the transport and dispersion of powdered activated carbon in raw water transmission pipelines
ABSTRACT Powdered activated carbon (PAC) dosing in raw water transmission pipelines is a promising emergency strategy for enhancing pollutant control before conventional treatment. In this study, a three-dimensional CFD-DPM model was established to investigate the transport and dispersion of PAC particles in a pressurized pipeline. The effects of velocity ratio, particle density, and injection position were evaluated systematically. The results showed that the velocity ratio v*, defined as the ratio of injection velocity to main-flow velocity, was the dominant factor governing PAC dispersion. As the velocity ratio increased, the particle distribution evolved from local aggregation to cross-sectional spreading and then to relatively sufficient mixing. When v* < 1, PAC particles remained concentrated near the injection zone, resulting in limited dispersion. When 1 ≤ v* ≤ 2.5, cross-sectional spreading increased significantly. At v* = 5.0, PAC particles occupied a large proportion of the pipe cross-section within a short downstream distance, and the dispersion ratio stabilized at approximately 50%. In contrast, particle density and injection position had only minor effects on the overall dispersion pattern, mainly influencing local spreading and the initial cross-sectional distribution.
Authors
- Jiachun Liu (ORCID: https://orcid.org/0000-0002-5755-7796)
- Tao Lin (ORCID: https://orcid.org/0000-0003-1011-3159)
- Yanbo Luo (ORCID: https://orcid.org/0009-0006-9321-3604)
- Zhigang Liu (ORCID: https://orcid.org/0000-0003-4556-6051)
Institutions
- Ningbo University (CN)
- Hohai University (CN)
Publication Details
- Journal
- Water Science & Technology
- Published
- 2026-11-13
- DOI
- https://doi.org/10.2166/wst.2026.377
- Primary Topic
- Particle Dynamics in Fluid Flows
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Natural Science Foundation of Ningbo