Design Blueprint: Carbon-Dioxide Snow Cleaning for Mars Radiators and Sensors: Subliming-Jet Dust Removal Sizing
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24193425): This paper presents a sized design for a Mars surface system based on cleaning by a jet of carbon-dioxide snow that lifts particles and then sublimes away, leaving no liquid residue. A robotic cleaning head using compressed Martian carbon dioxide expanded into snow particles. The study is SIMULATED, NOT MEASURED: all values are computed from stated assumptions and published Martian environmental data, and no hardware was built or tested. The principal computed results are surface area m2 of 90, co2 use kg m2 of 0.42, co2 per cleaning kg of 37.8, compressor power kW of 1.8. Further results include cleaning duration h of 2.6, electricity per cleaning kWh of 4.68, transmission before of 0.71, transmission after of 0.93. The design is a computed study for peaceful surface operations — power supply, thermal control, radiation protection, construction and resource extraction for a crewed base — and it has no targeting or weapon application. Losses, deratings for dust and temperature, and the margin between capacity and the stated load are reported alongside the headline figures, and the limitations section states what a physical test would still need to establish. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-13
- DOI
- https://doi.org/10.5281/zenodo.24194271
- Primary Topic
- Planetary Science and Exploration
- Type
- preprint