Design for battery-cartridge longevity in cordless power tools: Modular standardization via LCA to end-of-life management and circularity

Proprietary battery systems in cordless power tools cause premature obsolescence, resource inefficiency and barriers to end-of-life management. This study quantifies the benefits of standardization and modularization through a comparative life cycle assessment (LCA) of three representative cordless-drill battery designs (36 V, 18 V and 18 V nominal/20 V max) under three standardization scenarios: proprietary, partially standardized, and fully standardized modular. The attributional LCA follows ISO 14040/14044 (GWP100 of ReCiPe 2016 (H) and critical-metal demand), uses an energy-based functional unit (225 kWh of battery discharge energy over 10 years) that includes the tool body and charger, and applies Monte Carlo simulation to battery lifespan, failure rates and recycling efficiency. Full standardization with modular design reduces global warming potential by 13–26% (mean 20%) and net primary Ni–Co–Li demand by 48–51% relative to proprietary systems; replacement part availability explains about half of this reduction. Battery cycle life, material-related burdens and part availability are the most influential design-related parameters (a 20% improvement in cycle life or availability lowers GWP by 5–9% and 2–6%), whereas the electricity grid sets the use-phase share (−29% to +94% GWP). The benefit holds in 99.2–99.95% of paired Monte Carlo draws. Five design guidelines are proposed (Design for Replaceability, Modularity, Compatibility, Recyclability and Repair) and operationalized in a conceptual battery architecture. This research provides actionable insights for manufacturers, policymakers and standardization bodies, including the European Commission's ongoing common-charger assessment; economic feasibility and consumer acceptance require further research.

Authors

Institutions

Publication Details

Journal
Cleaner Environmental Systems
Published
2026-11-13
DOI
https://doi.org/10.1016/j.cesys.2026.100538
Primary Topic
Sustainable Supply Chain Management
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design for battery-cartridge longevity in cordless power tools: Modular standardization via LCA to end-of-life management and circularity

Bahram Ipaki, Ali Najafi Ziarani
2 links
Cleaner Environmental Systems
Sustainable Supply Chain Management
article

Design for battery-cartridge longevity in cordless power tools: Modular standardization via LCA to end-of-life management and circularity

Bahram Ipaki, Ali Najafi Ziarani
article en

Abstract

Proprietary battery systems in cordless power tools cause premature obsolescence, resource inefficiency and barriers to end-of-life management. This study quantifies the benefits of standardization and modularization through a comparative life cycle assessment (LCA) of three representative cordless-drill battery designs (36 V, 18 V and 18 V nominal/20 V max) under three standardization scenarios: proprietary, partially standardized, and fully standardized modular. The attributional LCA follows ISO 14040/14044 (GWP100 of ReCiPe 2016 (H) and critical-metal demand), uses an energy-based functional unit (225 kWh of battery discharge energy over 10 years) that includes the tool body and charger, and applies Monte Carlo simulation to battery lifespan, failure rates and recycling efficiency. Full standardization with modular design reduces global warming potential by 13–26% (mean 20%) and net primary Ni–Co–Li demand by 48–51% relative to proprietary systems; replacement part availability explains about half of this reduction. Battery cycle life, material-related burdens and part availability are the most influential design-related parameters (a 20% improvement in cycle life or availability lowers GWP by 5–9% and 2–6%), whereas the electricity grid sets the use-phase share (−29% to +94% GWP). The benefit holds in 99.2–99.95% of paired Monte Carlo draws. Five design guidelines are proposed (Design for Replaceability, Modularity, Compatibility, Recyclability and Repair) and operationalized in a conceptual battery architecture. This research provides actionable insights for manufacturers, policymakers and standardization bodies, including the European Commission's ongoing common-charger assessment; economic feasibility and consumer acceptance require further research.

Cleaner Environmental SystemsVol. 23
Tabriz Islamic Arts University (IR)
European Commission
Responsible consumption and production, Affordable and clean energy, Industry, innovation and infrastructure, Climate action
Sustainable Supply Chain Management
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon