Strength–thermal conductivity synergy and plastic deformation behavior in rolled Mg–Ce alloys regulated by solute redistribution and interfacial features
Rolled magnesium alloy sheets are promising for lightweight and efficient heat-dissipation applications. However, their strength, thermal conductivity (TC), and plasticity have long been mutually constrained. To address this trade-off and avoid the problems caused by multicomponent alloying, such as complicated processing and difficult recycling, Mg– x Ce ( x = 0.5, 1.1, and 2.2 wt.%) binary alloys were selected in this study. A strategy was adopted to transform solute atoms acting as scattering sources into strengthening phases. Through Ce redistribution involving dynamic precipitation and grain-boundary segregation, as well as the associated evolution of Mg–Ce phase interfacial features, improved strength–TC synergy was achieved in the rolled Mg–Ce alloys. The synergistic mechanisms among thermal transport, strengthening, and plastic deformation were also investigated. A series of magnesium alloy sheets with high TC and high strength were successfully prepared. Among them, Mg–1.1Ce showed the best balance between mechanical properties and TC, with a yield strength of 234.3 MPa and a TC of 148.3 W·m⁻¹·K⁻¹. Compared with the as-cast alloy, the rolled Mg–1.1Ce alloy exhibited a synergistic improvement in yield strength and TC. This study establishes a mechanistic correlation among Ce redistribution, TC, strengthening behavior, and local strain localization in rolled Mg-Ce alloys.
Authors
- Taiki Nakata (ORCID: https://orcid.org/0009-0001-0317-4618)
- S. Kamado (ORCID: https://orcid.org/0000-0002-1973-2901)
- Wenzhuo Xie
- Chao Xu (ORCID: https://orcid.org/0000-0002-5099-0060)
- Lin Geng (ORCID: https://orcid.org/0000-0001-6403-1672)
- Xu Zhang (ORCID: https://orcid.org/0000-0002-8034-932X)
- Yanpu Wang (ORCID: https://orcid.org/0000-0001-8093-6965)
- Wenke Wang
- Xiaojun Wang
- Huafeng Liu
- Shuanglong Cong
Institutions
- Harbin Institute of Technology (CN)
- Suzhou Research Institute (CN)
- Nagaoka University of Technology (JP)
Publication Details
- Journal
- Journal of Magnesium and Alloys
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1016/j.jma.2026.102307
- Primary Topic
- Magnesium Alloys: Properties and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- State Key Laboratory of Advanced Welding and Joining