Precise and Intelligent Registration of Multi-Station Point Clouds for Segmental Girders Based on Automatic Spherical Target Extraction and Two-Stage Radius Refinement

To address the issues of reliance on manual operation for spherical target extraction and limited sphere center positioning accuracy caused by the absence of radius priors in multi-station laser scanning point cloud registration for precast segmental girders, this paper proposes an intelligent multi-station point cloud registration method based on automatic spherical target extraction and two-stage radius refinement. Spherical targets are automatically extracted via surround-view projection and image cross-correlation, and point cloud backtracking is realized through pixel-to-3D point index mapping. Two-stage radius fitting is then conducted by integrating a prior radius knowledge base with robust statistical filtering: RANSAC and probabilistic filtering are first used to obtain the prior radius and feasible interval, which is subsequently treated as a hard constraint, and TRF and L-BFGS-B are then adopted for two-level optimization to refine the sphere centers. Finally, correspondences are established according to the spherical target distance matrix, and SVD is employed to solve the rigid transformation, thereby completing multi-station registration and fusion. Using a segmental girder for extraction, fitting, and comparative ablation experiments, the experimental results show that the proposed method is highly automated, with a 100% spherical target detection rate and an average matching degree higher than 0.80; the fitted radius differences range from 0 to 1.34 mm; the mean of the average consistency residuals of homologous sphere centers after registration is 1.26 mm; and the fitted radius difference and the corresponding segmental girder length difference are 0.52 mm and 3.5 mm, respectively, outperforming commonly used international fitting methods in accuracy. Three segmental girders were used for dimensional inspection validation, and the results show that the dimensional measurement errors of all three segmental girders meet the engineering tolerance requirements, verifying the generalization ability and stability of the proposed registration method.

Authors

Institutions

Publication Details

Journal
Applied Sciences
Published
2026-11-13
DOI
https://doi.org/10.3390/app162211250
Primary Topic
3D Surveying and Cultural Heritage
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Precise and Intelligent Registration of Multi-Station Point Clouds for Segmental Girders Based on Automatic Spherical Target Extraction and Two-Stage Radius Refinement

Yongwei Wang, Xiankai Xue, Hao Zhu, Tao Jiang et al.
2 links
Applied Sciences
3D Surveying and Cultural Heritage
article

Precise and Intelligent Registration of Multi-Station Point Clouds for Segmental Girders Based on Automatic Spherical Target Extraction and Two-Stage Radius Refinement

Yongwei Wang, Xiankai Xue, Hao Zhu, Tao Jiang, Yakun Xie, Hao Li
article en

Abstract

To address the issues of reliance on manual operation for spherical target extraction and limited sphere center positioning accuracy caused by the absence of radius priors in multi-station laser scanning point cloud registration for precast segmental girders, this paper proposes an intelligent multi-station point cloud registration method based on automatic spherical target extraction and two-stage radius refinement. Spherical targets are automatically extracted via surround-view projection and image cross-correlation, and point cloud backtracking is realized through pixel-to-3D point index mapping. Two-stage radius fitting is then conducted by integrating a prior radius knowledge base with robust statistical filtering: RANSAC and probabilistic filtering are first used to obtain the prior radius and feasible interval, which is subsequently treated as a hard constraint, and TRF and L-BFGS-B are then adopted for two-level optimization to refine the sphere centers. Finally, correspondences are established according to the spherical target distance matrix, and SVD is employed to solve the rigid transformation, thereby completing multi-station registration and fusion. Using a segmental girder for extraction, fitting, and comparative ablation experiments, the experimental results show that the proposed method is highly automated, with a 100% spherical target detection rate and an average matching degree higher than 0.80; the fitted radius differences range from 0 to 1.34 mm; the mean of the average consistency residuals of homologous sphere centers after registration is 1.26 mm; and the fitted radius difference and the corresponding segmental girder length difference are 0.52 mm and 3.5 mm, respectively, outperforming commonly used international fitting methods in accuracy. Three segmental girders were used for dimensional inspection validation, and the results show that the dimensional measurement errors of all three segmental girders meet the engineering tolerance requirements, verifying the generalization ability and stability of the proposed registration method.

Applied SciencesVol. 16(22)
Southwest Jiaotong University (CN)
National Key Research and Development Program of China
Industry, innovation and infrastructure
3D Surveying and Cultural Heritage
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon