Threshold Voltage Control and Normally-Off Operation in Diamond Two-Dimensional Hole Gas FETs Using Dielectric Interface Dipoles
Abstract Diamond two-dimensional hole gas(2DHG) field effect transistors (FETs) are normally-on devices. Prior methods to achieve normally-off operation like oxygen(O) termination and nitrogen(N) implantation modify the channel. For O-termination the sheet resistance increases by 1-2 orders of magnitude, whereas N-implantation results in loss of 70-98 % of on-current(Ion). In the present work, we demonstrate through a TCAD simulation study, how dielectric interface dipoles can be used to modulate threshold voltage(Vt) and achieve normally-off operation without affecting the channel. These dipoles are formed due to the difference in oxygen areal density which introduces a potential step whose sign depends on the deposition order. We study two pairs of dielectrics, Al2O3/HfO2 and Al2O3/La2O3 which shift Vt by 0.84 V and 1.79 V respectively. The shift is independent of interface charge density(Qf), equivalent oxide thickness(EOT), and gate work function. At matched gate overdrive, the dipole reduces Ion by less than 1 %, while obtaining the same shifts by uniformly reducing the 2DHG density would reduce it by 15 % and 31 %. Finally, we present a Vt design window which is expressed as a single boundary condition of the product of Qf and EOT.
Authors
- Maitreya Dutta (ORCID: https://orcid.org/0000-0002-2441-2574)
- Aditya Das Utsha
Institutions
- The University of Texas at San Antonio (US)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11546300/v1
- Primary Topic
- Diamond and Carbon-based Materials Research
- Type
- preprint