Nanoparticle Modification of Acrylic-Based Soft Denture Liner: Effects of Samarium Oxide, Boron Nitride and Titanium Dioxide on Surface, Chemical and Adhesive Properties
Abstract Background This in vitro study evaluated the effects of incorporating samarium oxide (Sm₂O₃), boron nitride (BN), and titanium dioxide (TiO₂) nanoparticles into an acrylic-based soft denture liner on residual monomer release, surface roughness, contact angle, and peel bond strength. Methods Ten groups were prepared: a control and groups containing each nanoparticle at 1, 2, and 5 wt%. Surface roughness (Ra) and contact angle were measured by confocal profilometry and optical tensiometry (n = 10), and residual monomer release was determined by HPLC at 12, 24, and 72 hours (n = 10). Peel bond strength was assessed by 180° peel testing according to ASTM D903-98 (n = 8). Data were analyzed by one-way ANOVA with Tukey HSD test, and by two-way ANOVA for monomer release ( P <.05). Results All nanoparticle groups released significantly less residual monomer than the control at all time points ( P <.05). Surface roughness decreased significantly only in the Sm₂O₃-containing S1 and S2 groups. Contact angle was significantly higher than that of the control in most TiO₂ and Sm₂O₃ groups. All groups exceeded the clinically acceptable peel bond strength threshold; the highest value (S5, 1.461 ± 0.598 N/mm) did not differ significantly from that of the control. Conclusion The effects of nanoparticle incorporation depended on particle type and concentration. Sm₂O₃ showed a favorable overall profile, reducing residual monomer release and, at low and medium concentrations, surface roughness, while maintaining bond strength above the clinical threshold, and is a promising additive candidate for acrylic-based soft denture liners. Further research is needed.
Authors
- Cem ŞAHİN (ORCID: https://orcid.org/0000-0002-1301-8328)
- Berfu ERHAN GÜRESER
Institutions
- Sağlık Bilimleri Üniversitesi (TR)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11432004/v1
- Primary Topic
- Dental materials and restorations
- Type
- preprint