Load recovery at fixed deflection after creep relaxation in bending as a test of anelastic back-stress laws
Abstract Creep-ageing models treat unloading as elastic, although part of the strain accumulated on the die keeps returning after release. A bending test is introduced in which a bar is unloaded to zero load after an eight-hour relaxation and the deflection is held for six hours while the load recovers, a response not previously recorded in bending. Eleven such tests on three thicknesses, with uniaxial recovery at zero stress and at fixed strain, give recovery under three conditions of constraint. A six-parameter back-stress law identified on three uniaxial creep and recovery histories is applied without refitting to the other two. The law describes the relaxation on the die, and the amplitude of the recovery transfers to bending, whereas the law returns the load at 1.3 to 3.5 times the measured half-time. The records after unloading determine the time scale of the recoverable strain, and the measured recovery saturates with hold duration where the law continues to rise. The dependence on hold duration has a candidate in a back-stress stiffness rising during the hold as the mobile dislocation density falls. For a die-clamped 5 mm section, the law projects a delayed springback of 16 to 18 % of the elastic springback after thirty days, and retaining that shape requires 10 to 42 % more die curvature than compensation at release. Recovery after unloading therefore provides a separate test for a constitutive law that is to predict the retained shape of a formed part.
Authors
- Yo-Lun Yang
Institutions
- National Taipei University of Technology (TW)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-14
- DOI
- https://doi.org/10.21203/rs.3.rs-11550281/v1
- Primary Topic
- Metal Forming Simulation Techniques
- Type
- preprint
Funders
- National Science and Technology Council