Thermally Actuated SMA-Hinged Deployable Membrane Antennas Reflector with Integrated Multilayer Laminate Modules for Space-borne Applications
Abstract This study presents a thermo-mechanical framework for the design, optimization, and environmental qualification of a high-rigidity, low-wrinkling hexagonal deployable membrane structure for space applications. Incorporating shape memory alloy (SMA) Nitinol wire hinges A f = 60C, four material systems Kapton, Mylar, Kevlar, and a symmetric Kevlar-core multilayer laminate [0/0/Kevlar/0/0] were evaluated using Classical Laminated Plate Theory (CLPT) and non-linear finite element analysis over a 65 second deployment window. A four-stage Solid Isotropic Material with Penalization (SIMP) surface topology optimization loop was integrated to reduce out-of-plane distortion. Scaling the Nitinol wire diameter d = 1.0–5.0 mm revealed that while higher recovery torques suppress membrane wrinkling, increased volumetric thermal mass introduces up to an 18.5 second activation delay and elevated terminal impact accelerations impact = -2.480 mm/s 2 . Qualification under simulated Thermal Vacuum (TVAC, 10 − 6 Torr and 100 orbital thermal cycles − 120C to + 120C verified that the near-zero thermal expansion coefficient of the Kevlar-core laminate eff = + 1.2 ppm/C limits thermal hysteresis degradation to + 2.3% while satisfying ASTM E595 outgassing limits TML = 0.28%, CVCM = 0.01%). Using multi-objective NSGA-II optimization, the Kevlar-core laminate design point (DP-3) was identified as optimal, achieving a spatial RMS surface error of 0.745\ mm, a fundamental frequency of 5.45 Hz, and a structural mass of 3.10 g.
Authors
- Pradeep Singh (ORCID: https://orcid.org/0009-0004-3867-9124)
- Satish Kumar
Institutions
- Motilal Nehru National Institute of Technology (IN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11387225/v1
- Primary Topic
- Structural Analysis and Optimization
- Type
- preprint