Multifunctional Acrylonitrile Styrene Acrylate/Cuprous Oxide Nanocomposites in MEX 3D Printing: Rheological, Thermomechanical and Antibacterial Metrics

ABSTRACT To address the critical need for robust and self‐sterilizing materials for challenging environments, this research introduces the use of cuprous oxide (Cu 2 O) nanoparticles in weatherproof acrylonitrile styrene acrylate (ASA) through material extrusion (MEX) 3D printing to produce multifunctional nanocomposites with improved mechanical, rheological, and antibacterial properties. A range of ASA/Cu 2 O compositions (0.5–3.0 wt.% filler loading) was compounded and extruded into filament, and then specimens were fabricated using MEX 3D printing. Thermal properties of the nanocomposites were evaluated by thermogravimetric analysis and differential scanning calorimetry; the rheological behavior and printability were determined by melt viscosity and melt flow rate measurements. The influence of Cu 2 O content on printed part quality was evaluated by using micro‐computed tomography (dimensional accuracy and porosity were quantified). Incorporation of Cu 2 O improved the mechanical properties by 13%–30% (tensile strength 16.6%–46.4 MPa, flexural strength 23.2%–67.5 MPa, toughness about 30%) compared to the neat matrix. The 1.5 wt.% composition showed the best overall mechanical performance. The antibacterial properties were confirmed by the agar well diffusion method against Gram‐negative bacteria ( E. coli ) and Gram‐positive bacteria ( S. aureus ). The simultaneous structural reinforcement and biocidal properties in a single material without sacrificing processability or geometrical accuracy render ASA/Cu 2 O a promising nanocomposite for components in the MEX 3D printing process in outdoor and public‐hygiene applications.

Authors

Institutions

Publication Details

Journal
Polymer Composites
Published
2026-11-13
DOI
https://doi.org/10.1002/pc.71822
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Multifunctional Acrylonitrile Styrene Acrylate/Cuprous Oxide Nanocomposites in MEX 3D Printing: Rheological, Thermomechanical and Antibacterial Metrics

Nectarios Vidakis, Nektarios K. Nasikas, Markos Petousis, Vassilis M. Papadakis et al.
3 links
Polymer Composites
Additive Manufacturing and 3D Printing Technologies
article

Multifunctional Acrylonitrile Styrene Acrylate/Cuprous Oxide Nanocomposites in MEX 3D Printing: Rheological, Thermomechanical and Antibacterial Metrics

Nectarios Vidakis, Nektarios K. Nasikas, Markos Petousis, Vassilis M. Papadakis, Nikolaos Mountakis, Apostolos Argyros, Emmanuel I. Stratakis, Nikolaos Michailidis, Maria Spyridaki
article en

Abstract

ABSTRACT To address the critical need for robust and self‐sterilizing materials for challenging environments, this research introduces the use of cuprous oxide (Cu 2 O) nanoparticles in weatherproof acrylonitrile styrene acrylate (ASA) through material extrusion (MEX) 3D printing to produce multifunctional nanocomposites with improved mechanical, rheological, and antibacterial properties. A range of ASA/Cu 2 O compositions (0.5–3.0 wt.% filler loading) was compounded and extruded into filament, and then specimens were fabricated using MEX 3D printing. Thermal properties of the nanocomposites were evaluated by thermogravimetric analysis and differential scanning calorimetry; the rheological behavior and printability were determined by melt viscosity and melt flow rate measurements. The influence of Cu 2 O content on printed part quality was evaluated by using micro‐computed tomography (dimensional accuracy and porosity were quantified). Incorporation of Cu 2 O improved the mechanical properties by 13%–30% (tensile strength 16.6%–46.4 MPa, flexural strength 23.2%–67.5 MPa, toughness about 30%) compared to the neat matrix. The 1.5 wt.% composition showed the best overall mechanical performance. The antibacterial properties were confirmed by the agar well diffusion method against Gram‐negative bacteria ( E. coli ) and Gram‐positive bacteria ( S. aureus ). The simultaneous structural reinforcement and biocidal properties in a single material without sacrificing processability or geometrical accuracy render ASA/Cu 2 O a promising nanocomposite for components in the MEX 3D printing process in outdoor and public‐hygiene applications.

Polymer Composites
Harbin Engineering University (CN), Aristotle University of Thessaloniki (GR), Hellenic Military Academy (GR), Hellenic Mediterranean University (GR), University of West Attica (GR), Foundation for Research and Technology Hellas (GR)
Foundation for Research and Technology-Hellas
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon