Heat and Fluid Flow Modeling in Laser Powder Bed Fusion of Ti-6Al-4V: Insights from a Multi-Track Study Beyond Single-Track Analysis

Abstract Laser powder bed fusion (LPBF) is widely recognized for its capability in the fabrication of complex metal components. However, the high thermal gradients and rapid solidification associated with this process remain major challenges for controlling melt pool stability and microstructural evolution. In particular, the effect of overlap ratio between passes on transient thermal behavior during multi-tracks scanning has not yet been fully understood, due to the difficulty of experimentally characterizing the underlying thermal phenomena. This study presents a high-fidelity computational fluid dynamics model, developed using OpenFOAM framework, to examine the effect of the overlap ratio on the melt pool evolution of Ti-6Al-4V during the LPBF process. The model incorporates the physics of heat transfer, fluid flow, phase changes, and the moving laser heat source to predict transient temperature evolution and melt pool dynamics. Four overlap conditions (0%, 10%, 20%, and 30%) were systematically analyzed under identical processing parameters. The thermal histories were quantitatively evaluated through peak temperature, liquid lifetime, solidification time, cooling rate, and remelting behavior. Two computational approaches are explored: single-track modeling where the laser power and scan speed are the primary varying parameters, and multi-track modelling encompasses varying overlapping conditions (0%, 10%, 20%, and 30%). To validate the model, single track results were first compared with experimental data reported in existing literature. The results reveal that increasing the overlap ratio significantly enhances thermal accumulation, prolongs the duration above the liquidus temperature, reduces cooling rates, and promotes repeated remelting through more intense interaction between adjacent tracks. These thermal mechanisms generate a large melt pool zone while altering the local solidification conditions that govern microstructure formation. The proposed numerical model provides detailed insight into the thermal mechanisms governing the multi-track LPBF process and serves as a reliable tool for optimizing scanning strategies and overlap parameters, thereby improving process stability and the quality of additively manufactured Ti-6Al-4V parts.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-14
DOI
https://doi.org/10.21203/rs.3.rs-11498997/v1
Primary Topic
Additive Manufacturing Materials and Processes
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Heat and Fluid Flow Modeling in Laser Powder Bed Fusion of Ti-6Al-4V: Insights from a Multi-Track Study Beyond Single-Track Analysis

Toufik Tamsaout, Karim Kheloufi, Oum El Kheir Hadj Rahmoun, El-Hachemi Amara
1 links
Research Square
Additive Manufacturing Materials and Processes
preprint

Heat and Fluid Flow Modeling in Laser Powder Bed Fusion of Ti-6Al-4V: Insights from a Multi-Track Study Beyond Single-Track Analysis

Toufik Tamsaout, Karim Kheloufi, Oum El Kheir Hadj Rahmoun, El-Hachemi Amara
preprint en

Abstract

Abstract Laser powder bed fusion (LPBF) is widely recognized for its capability in the fabrication of complex metal components. However, the high thermal gradients and rapid solidification associated with this process remain major challenges for controlling melt pool stability and microstructural evolution. In particular, the effect of overlap ratio between passes on transient thermal behavior during multi-tracks scanning has not yet been fully understood, due to the difficulty of experimentally characterizing the underlying thermal phenomena. This study presents a high-fidelity computational fluid dynamics model, developed using OpenFOAM framework, to examine the effect of the overlap ratio on the melt pool evolution of Ti-6Al-4V during the LPBF process. The model incorporates the physics of heat transfer, fluid flow, phase changes, and the moving laser heat source to predict transient temperature evolution and melt pool dynamics. Four overlap conditions (0%, 10%, 20%, and 30%) were systematically analyzed under identical processing parameters. The thermal histories were quantitatively evaluated through peak temperature, liquid lifetime, solidification time, cooling rate, and remelting behavior. Two computational approaches are explored: single-track modeling where the laser power and scan speed are the primary varying parameters, and multi-track modelling encompasses varying overlapping conditions (0%, 10%, 20%, and 30%). To validate the model, single track results were first compared with experimental data reported in existing literature. The results reveal that increasing the overlap ratio significantly enhances thermal accumulation, prolongs the duration above the liquidus temperature, reduces cooling rates, and promotes repeated remelting through more intense interaction between adjacent tracks. These thermal mechanisms generate a large melt pool zone while altering the local solidification conditions that govern microstructure formation. The proposed numerical model provides detailed insight into the thermal mechanisms governing the multi-track LPBF process and serves as a reliable tool for optimizing scanning strategies and overlap parameters, thereby improving process stability and the quality of additively manufactured Ti-6Al-4V parts.

Research Square
Centre de Recherche en Nanosciences et Nanotechnologies (DZ)
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon