Multifunctional characterization and electrochemical performance of nominally Sm-substituted Pb₂Mn₂Fe₁₂O₂₂ Y-type hexaferrite nanoparticles synthesized via the Co-precipitation technique

Y-type hexaferrite nanocrystals containing multiple redox-active cations have attracted attention for electrochemical energy-storage applications. In the present study, nominally Sm-substituted Pb₂Mn₂Fe₁₂O₂₂, with the nominal composition Pb₂Mn₂Sm₀.₀₂Fe₁₁.₉₈O₂₂, was synthesized by the co-precipitation technique. X-ray diffraction (XRD) analysis indicated the formation of a Y-type hexagonal phase without detectable secondary phases within the detection limit of XRD. Transmission electron microscopy (TEM) revealed agglomerated nanoparticles with an average particle size of approximately 20 nm. Fourier-transform infrared (FTIR), Raman, and photoluminescence (PL) analyses provided complementary information on the lattice vibrations and optical/defect-related characteristics of the material. TGA/DTA of the dried precursor revealed several thermal events associated with moisture removal, precursor decomposition, and thermal evolution toward oxide-phase formation prior to the final calcination treatment. Electrodes were fabricated using an 80:10:10 wt ratio of active material, PVDF, and carbon black and evaluated in a three-electrode configuration using 6 M KOH electrolyte. Cyclic voltammetry (CV) measurements yielded a maximum specific capacitance of 204.6 F g⁻¹ at a scan rate of 10 mV s⁻¹. Galvanostatic charge–discharge measurements gave specific capacitances of 156.0, 50.4, and 4.9 F g⁻¹ at current densities of 10, 15, and 20 A g⁻¹, respectively, indicating pronounced current-density-dependent charge-storage behavior. Kinetic analysis indicated mixed surface-controlled and diffusion-influenced charge-storage processes, with a b-value of approximately 0.616; the Trasatti analysis estimated a diffusion-limited contribution of approximately 67.2% under the investigated conditions. Electrochemical impedance spectroscopy showed a solution resistance (Rₛ) of 0.708 Ω. Overall, the results demonstrate measurable Faradaic charge-storage behavior of the nominally Sm-substituted Y-type hexaferrite under the investigated electrochemical conditions and provide a basis for further optimization of its electrode performance.

Authors

Institutions

Publication Details

Journal
Next Materials
Published
2026-11-13
DOI
https://doi.org/10.1016/j.nxmate.2026.103944
Primary Topic
Supercapacitor Materials and Fabrication
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Multifunctional characterization and electrochemical performance of nominally Sm-substituted Pb₂Mn₂Fe₁₂O₂₂ Y-type hexaferrite nanoparticles synthesized via the Co-precipitation technique

Moustafa El‐Tahawy, Ahmed M. A. Henaish, R.M. Muthukrishnan, Amina I. Ghoneim
Next Materials
Supercapacitor Materials and Fabrication
article

Multifunctional characterization and electrochemical performance of nominally Sm-substituted Pb₂Mn₂Fe₁₂O₂₂ Y-type hexaferrite nanoparticles synthesized via the Co-precipitation technique

Moustafa El‐Tahawy, Ahmed M. A. Henaish, R.M. Muthukrishnan, Amina I. Ghoneim
article en

Abstract

Y-type hexaferrite nanocrystals containing multiple redox-active cations have attracted attention for electrochemical energy-storage applications. In the present study, nominally Sm-substituted Pb₂Mn₂Fe₁₂O₂₂, with the nominal composition Pb₂Mn₂Sm₀.₀₂Fe₁₁.₉₈O₂₂, was synthesized by the co-precipitation technique. X-ray diffraction (XRD) analysis indicated the formation of a Y-type hexagonal phase without detectable secondary phases within the detection limit of XRD. Transmission electron microscopy (TEM) revealed agglomerated nanoparticles with an average particle size of approximately 20 nm. Fourier-transform infrared (FTIR), Raman, and photoluminescence (PL) analyses provided complementary information on the lattice vibrations and optical/defect-related characteristics of the material. TGA/DTA of the dried precursor revealed several thermal events associated with moisture removal, precursor decomposition, and thermal evolution toward oxide-phase formation prior to the final calcination treatment. Electrodes were fabricated using an 80:10:10 wt ratio of active material, PVDF, and carbon black and evaluated in a three-electrode configuration using 6 M KOH electrolyte. Cyclic voltammetry (CV) measurements yielded a maximum specific capacitance of 204.6 F g⁻¹ at a scan rate of 10 mV s⁻¹. Galvanostatic charge–discharge measurements gave specific capacitances of 156.0, 50.4, and 4.9 F g⁻¹ at current densities of 10, 15, and 20 A g⁻¹, respectively, indicating pronounced current-density-dependent charge-storage behavior. Kinetic analysis indicated mixed surface-controlled and diffusion-influenced charge-storage processes, with a b-value of approximately 0.616; the Trasatti analysis estimated a diffusion-limited contribution of approximately 67.2% under the investigated conditions. Electrochemical impedance spectroscopy showed a solution resistance (Rₛ) of 0.708 Ω. Overall, the results demonstrate measurable Faradaic charge-storage behavior of the nominally Sm-substituted Y-type hexaferrite under the investigated electrochemical conditions and provide a basis for further optimization of its electrode performance.

Next MaterialsVol. 14
Tanta University (EG), SR University (IN), Saveetha University (IN)
Supercapacitor Materials and Fabrication
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon