Distributionally Robust Fatigue-Constrained Topology Optimization for Additive Manufacturing Under Spatially Correlated Fatigue-Strength Uncertainty
Topology optimization is increasingly important for additive manufacturing because it enables lightweight structures with complex load paths, while process-induced variability can produce spatial heterogeneity in fatigue resistance. This study develops a distributionally robust fatigue-constrained topology optimization framework that distinguishes two sources of uncertainty: spatial variability in local fatigue strength and ambiguity in the probabilities assigned to sampled uncertainty realizations. Spatial variability is represented by a correlated fatigue-strength random field, while probability-model ambiguity is treated using a discrete Kullback–Leibler ambiguity set. The framework is evaluated using an Al 6061-T6 cantilever benchmark and transfer studies involving Ti-6Al-4V, an L-bracket geometry, and a three-dimensional benchmark. In the principal Al case, KL-DRO reduces independent out-of-sample fatigue exceedance from 17.56% to 12.88% and lowers the 95th-percentile fatigue measure from 1.999 to 1.685, with an approximately 2.2% increase in material relative to mean-risk optimization. Similar reductions are observed for the L-bracket and three-dimensional benchmarks, whereas Ti-6Al-4V and matched material studies show little or no advantage. The results therefore indicate that KL-DRO can improve out-of-sample fatigue-tail performance when fatigue risk is active and the empirical uncertainty support is sufficiently informative, but it does not universally outperform mean-risk optimization. The proposed framework provides a computational basis for incorporating spatially resolved fatigue-property uncertainty into topology optimization for additively manufactured structures.
Authors
- Pu Han (ORCID: https://orcid.org/0000-0002-4731-1637)
- Shams Torabnia (ORCID: https://orcid.org/0000-0002-0247-0685)
- Keng Hsu (ORCID: https://orcid.org/0000-0003-2426-5866)
- Nathan Fonseca (ORCID: https://orcid.org/0000-0002-6297-1705)
- Mohamed Abbas
- Sophia Michelle Boyce
Institutions
- Arizona State University (US)
Publication Details
- Journal
- Journal of Manufacturing and Materials Processing
- Published
- 2026-11-13
- DOI
- https://doi.org/10.3390/jmmp10110509
- Primary Topic
- Topology Optimization in Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00