PIV investigation of ice-induced flow separation and aerodynamic performance degradation in a high camber low-Reynolds-number UAV airfoil

Ice accretion poses a significant threat to the aerodynamic performance and operational safety of unmanned aerial vehicles, particularly under low Reynolds-number where boundary-layer behaviour is highly sensitive to surface disturbances. This study investigates the effects of realistic glaze and rime ice accretion on the aerodynamic characteristics and flow physics of a high-camber S1223 airfoil. Icing experiments were conducted in a controlled icing wind tunnel under two distinct atmospheric regimes: glaze ice formation at −5 °C with high liquid water content, and rime ice formation at −20 °C with low liquid water content. The resulting ice geometries were three-dimensionally scanned, digitally reconstructed, and reproduced using rapid prototyping to enable repeatable aerodynamic testing. Lift and drag measurements were performed in a low-speed wind tunnel over angles of attack from 0° to 24°, covering pre-stall and post-stall conditions. Time-averaged two-dimensional Particle Image Velocimetry (PIV) was employed to quantify ice-induced modifications to the flow field. The results reveal fundamentally different aerodynamic penalty mechanisms for glaze and rime ice. Glaze ice causes substantial geometric distortion, leading to premature flow separation, drag penalties exceeding 100% at high angles of attack, and marked alteration of stall behavior. In contrast, rime ice primarily introduces roughness-induced effects, increasing drag by up to approximately 89% at α = 24° while sustaining or enhancing lift at elevated angles and delaying distinct stall onset. These findings highlight the critical importance of accounting for realistic ice shapes and flow-field effects when assessing UAV aerodynamic performance and developing effective ice protection and mitigation strategies.

Authors

Institutions

Publication Details

Journal
Journal of Wind Engineering and Industrial Aerodynamics
Published
2026-11-13
DOI
https://doi.org/10.1016/j.jweia.2026.106664
Primary Topic
Icing and De-icing Technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

PIV investigation of ice-induced flow separation and aerodynamic performance degradation in a high camber low-Reynolds-number UAV airfoil

Muhammad Shakeel Virk, Manaf Muhammed, Amrit Kumar
1 links
Journal of Wind Engineering and Industrial Aerodynamics
Icing and De-icing Technologies
article

PIV investigation of ice-induced flow separation and aerodynamic performance degradation in a high camber low-Reynolds-number UAV airfoil

Muhammad Shakeel Virk, Manaf Muhammed, Amrit Kumar
article en

Abstract

Ice accretion poses a significant threat to the aerodynamic performance and operational safety of unmanned aerial vehicles, particularly under low Reynolds-number where boundary-layer behaviour is highly sensitive to surface disturbances. This study investigates the effects of realistic glaze and rime ice accretion on the aerodynamic characteristics and flow physics of a high-camber S1223 airfoil. Icing experiments were conducted in a controlled icing wind tunnel under two distinct atmospheric regimes: glaze ice formation at −5 °C with high liquid water content, and rime ice formation at −20 °C with low liquid water content. The resulting ice geometries were three-dimensionally scanned, digitally reconstructed, and reproduced using rapid prototyping to enable repeatable aerodynamic testing. Lift and drag measurements were performed in a low-speed wind tunnel over angles of attack from 0° to 24°, covering pre-stall and post-stall conditions. Time-averaged two-dimensional Particle Image Velocimetry (PIV) was employed to quantify ice-induced modifications to the flow field. The results reveal fundamentally different aerodynamic penalty mechanisms for glaze and rime ice. Glaze ice causes substantial geometric distortion, leading to premature flow separation, drag penalties exceeding 100% at high angles of attack, and marked alteration of stall behavior. In contrast, rime ice primarily introduces roughness-induced effects, increasing drag by up to approximately 89% at α = 24° while sustaining or enhancing lift at elevated angles and delaying distinct stall onset. These findings highlight the critical importance of accounting for realistic ice shapes and flow-field effects when assessing UAV aerodynamic performance and developing effective ice protection and mitigation strategies.

Journal of Wind Engineering and Industrial AerodynamicsVol. 280
Loughborough University (GB), UiT The Arctic University of Norway (NO)
Norges Forskningsråd
Icing and De-icing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon