Design and experimental validation of an integrated cable driven robotic arm and gripper with 10 degrees of freedom

Cable-driven robotic manipulators can reduce distal mass by relocating actuators proximally, but increasing the number of remotely actuated degrees of freedom (DoFs) introduces complex cable-routing coupling and challenges in integrating payload capability with dexterous manipulation. In this study, we present LYNX-10, a lightweight 10-DoF cable-driven manipulator comprising a six-DoF arm and a four-DoF gripper. The arm combines a tower-type lifting mechanism, a selective compliance assembly robot arm (SCARA)-type positioning module, and a three-DoF quasi-spherical wrist. The design combines an elbow cable-routing decoupling mechanism with a geometry-based quasi-static compensation model implemented in the controller to compensate for deterministic cable-length redistribution during joint motion. The proposed compensation model substantially suppressed parasitic yaw motion during elbow rotation and parasitic pitch motion during combined elbow and wrist-yaw rotation. Coordinate-wise end-effector repeatability remained below 0.4 mm ( \(3\sigma\) ) at three tested positions. The 6 kg manipulator assembly handled payloads of up to 6 kg within shoulder and elbow operating ranges that narrowed as the payload increased. The four-DoF gripper generated a mean sustained pinch force of approximately 30 N over five measurements and enabled a page-turning task through coordinated thumb–index-finger, wrist, and arm motion. These results demonstrate a compact cable-driven architecture combining load-carrying capability, geometric coupling compensation, and dexterous end-effector manipulation.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-13
DOI
https://doi.org/10.1038/s41598-026-78958-5
Primary Topic
Robotic Mechanisms and Dynamics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design and experimental validation of an integrated cable driven robotic arm and gripper with 10 degrees of freedom

Wai Tuck Chow, Bin Zhu, Scott Stanley, I-Ming Chen et al.
1 links
Scientific Reports
Robotic Mechanisms and Dynamics
article

Design and experimental validation of an integrated cable driven robotic arm and gripper with 10 degrees of freedom

Wai Tuck Chow, Bin Zhu, Scott Stanley, I-Ming Chen, Peijie Shi, Robert Cassoni, Mingchen Zhang
article en

Abstract

Cable-driven robotic manipulators can reduce distal mass by relocating actuators proximally, but increasing the number of remotely actuated degrees of freedom (DoFs) introduces complex cable-routing coupling and challenges in integrating payload capability with dexterous manipulation. In this study, we present LYNX-10, a lightweight 10-DoF cable-driven manipulator comprising a six-DoF arm and a four-DoF gripper. The arm combines a tower-type lifting mechanism, a selective compliance assembly robot arm (SCARA)-type positioning module, and a three-DoF quasi-spherical wrist. The design combines an elbow cable-routing decoupling mechanism with a geometry-based quasi-static compensation model implemented in the controller to compensate for deterministic cable-length redistribution during joint motion. The proposed compensation model substantially suppressed parasitic yaw motion during elbow rotation and parasitic pitch motion during combined elbow and wrist-yaw rotation. Coordinate-wise end-effector repeatability remained below 0.4 mm ( \(3\sigma\) ) at three tested positions. The 6 kg manipulator assembly handled payloads of up to 6 kg within shoulder and elbow operating ranges that narrowed as the payload increased. The four-DoF gripper generated a mean sustained pinch force of approximately 30 N over five measurements and enabled a page-turning task through coordinated thumb–index-finger, wrist, and arm motion. These results demonstrate a compact cable-driven architecture combining load-carrying capability, geometric coupling compensation, and dexterous end-effector manipulation.

Scientific Reports
Nanyang Technological University (SG), Procter & Gamble (United States) (US)
Robotic Mechanisms and Dynamics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon