Techno-economic and Optimization of Micro and Meso-porous Carbons for Sustainable CO₂ Capture

Abstract Recently, carbon capture is very important to reduce the emissions of greenhouse gas. Conventional amine-based methods face limitations from high regeneration energy demand and toxic by-products, solid sorbent materials offer a promising alternative. In this study, cyanuric chloride-based polymer (CCP) and polymer-based porous carbon (PPC) are synthesized via solvothermal method and pyrolysis method; respectively. Potassium hydroxide (KOH) used as activating agent during pyrolysis process at activation temperatures ranging (600 – 900 °C) and KOH:polymer ratios varying from 1:1 to 4:1. The characterization of BET surface area shows that PPC synthesized at 900 °C and KOH:polymer ratio of 1:1 (PPC-900-1), gives the highest surface area of 1969 m²/g compared to 60 m²/g for CCP. The structure of all synthesized materials using PXRD and FTIR. Thermal stability is applied using TGA and the morphology analyzed using SEM and EDX. In terms of carbon capture application, PPC-900-1 provides moderate CO₂ uptake of 1.85 mmol/g at 298 K and 1 bar, and good selectivity of 2344 for 5% CO₂/H₂ mixture. These findings demonstrate that PPC-900-1 is a promising sorbent for CO₂ capture in the next-generation pre-combustion technology. A techno-economic assessment showed that utility requirements (nitrogen and deionized water) dominate production costs ($1327/kg), far exceeding chemical ($45.92/kg) and energy inputs ($89/kg). The operating conditions contribute hugely on the production cost of the porous carbon materials. Although lower activation temperatures and higher KOH ratios reduced the overall cost per kilogram, synthesis at 900 °C and KOH ratio of 1:1 achieved the lowest cost per unit area ($0.74/m²) while delivering the best material performance. This highlights the necessity of balancing cost efficiency with material performance to advance the scalability of porous carbon synthesized sorbent material used in pre-combustion carbon capture.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-13
DOI
https://doi.org/10.21203/rs.3.rs-11707709/v1
Primary Topic
Carbon Dioxide Capture Technologies
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Techno-economic and Optimization of Micro and Meso-porous Carbons for Sustainable CO₂ Capture

M. A. El Maghraby, Nabil Abdelmonem, Mahmoud Mohamed Abdelnaby, Ayat Osama Ghallab
2 links
Research Square
Carbon Dioxide Capture Technologies
preprint

Techno-economic and Optimization of Micro and Meso-porous Carbons for Sustainable CO₂ Capture

M. A. El Maghraby, Nabil Abdelmonem, Mahmoud Mohamed Abdelnaby, Ayat Osama Ghallab
preprint en

Abstract

Abstract Recently, carbon capture is very important to reduce the emissions of greenhouse gas. Conventional amine-based methods face limitations from high regeneration energy demand and toxic by-products, solid sorbent materials offer a promising alternative. In this study, cyanuric chloride-based polymer (CCP) and polymer-based porous carbon (PPC) are synthesized via solvothermal method and pyrolysis method; respectively. Potassium hydroxide (KOH) used as activating agent during pyrolysis process at activation temperatures ranging (600 – 900 °C) and KOH:polymer ratios varying from 1:1 to 4:1. The characterization of BET surface area shows that PPC synthesized at 900 °C and KOH:polymer ratio of 1:1 (PPC-900-1), gives the highest surface area of 1969 m²/g compared to 60 m²/g for CCP. The structure of all synthesized materials using PXRD and FTIR. Thermal stability is applied using TGA and the morphology analyzed using SEM and EDX. In terms of carbon capture application, PPC-900-1 provides moderate CO₂ uptake of 1.85 mmol/g at 298 K and 1 bar, and good selectivity of 2344 for 5% CO₂/H₂ mixture. These findings demonstrate that PPC-900-1 is a promising sorbent for CO₂ capture in the next-generation pre-combustion technology. A techno-economic assessment showed that utility requirements (nitrogen and deionized water) dominate production costs ($1327/kg), far exceeding chemical ($45.92/kg) and energy inputs ($89/kg). The operating conditions contribute hugely on the production cost of the porous carbon materials. Although lower activation temperatures and higher KOH ratios reduced the overall cost per kilogram, synthesis at 900 °C and KOH ratio of 1:1 achieved the lowest cost per unit area ($0.74/m²) while delivering the best material performance. This highlights the necessity of balancing cost efficiency with material performance to advance the scalability of porous carbon synthesized sorbent material used in pre-combustion carbon capture.

Research Square
King Fahd University of Petroleum and Minerals (SA), Cairo University (EG)
Cairo University, King Fahd University of Petroleum and Minerals
Climate action, Responsible consumption and production, Affordable and clean energy
Carbon Dioxide Capture Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon