The Influence of Support Roughness on Shape Distortion of Binder-Jetted Parts During Sintering—Experimental and Modelling Analysis

In recent years, metal binder jetting (MBJ) has seen increasing adoption in diverse manufacturing sectors due to its scalability, design flexibility, and high cost-efficiency. Sintering the green part at high temperature is an essential step to obtain a nominal product; nonetheless, it may detrimentally affect dimensional and geometrical accuracy, as parts with complex geometries undergo shape distortion because of gravity and/or friction at the contact area with the sintering trays. This study aimed to investigate the friction-induced deformation of sintering stainless-steel 316L thin-walled cubes on alumina supports with different surface finishing; arithmetic average roughness (Ra) and Maximum Height of the Profile (Rz) ranged from 0.2 to 12 μm and 3 to 60 μm, respectively. The deviation in the sintered cubes, measured using a Coordinate Measuring Machine (CMM), did not show a clear pattern as a function of surface finishing. Finite Element Modelling (FEM) confirmed that shape distortion during sintering marginally increases with an increase in the friction coefficient. Assuming a heterogeneous initial density distribution, the simulation results showed good agreement in predicting the concave deformation patterns observed in many samples (~0.45 mm, less than 5% error along the y-direction). This work proposes novel insight into the influence of tray roughness and the combined effect of friction and density distribution on shape distortion during sintering.

Authors

Institutions

Publication Details

Journal
Metals
Published
2026-11-13
DOI
https://doi.org/10.3390/met16111250
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

The Influence of Support Roughness on Shape Distortion of Binder-Jetted Parts During Sintering—Experimental and Modelling Analysis

I. Cristofolini, Marco Zago, Thomas Grippi, Amani Elabbassi
3 links
Metals
Additive Manufacturing Materials and Processes
article

The Influence of Support Roughness on Shape Distortion of Binder-Jetted Parts During Sintering—Experimental and Modelling Analysis

I. Cristofolini, Marco Zago, Thomas Grippi, Amani Elabbassi
article en

Abstract

In recent years, metal binder jetting (MBJ) has seen increasing adoption in diverse manufacturing sectors due to its scalability, design flexibility, and high cost-efficiency. Sintering the green part at high temperature is an essential step to obtain a nominal product; nonetheless, it may detrimentally affect dimensional and geometrical accuracy, as parts with complex geometries undergo shape distortion because of gravity and/or friction at the contact area with the sintering trays. This study aimed to investigate the friction-induced deformation of sintering stainless-steel 316L thin-walled cubes on alumina supports with different surface finishing; arithmetic average roughness (Ra) and Maximum Height of the Profile (Rz) ranged from 0.2 to 12 μm and 3 to 60 μm, respectively. The deviation in the sintered cubes, measured using a Coordinate Measuring Machine (CMM), did not show a clear pattern as a function of surface finishing. Finite Element Modelling (FEM) confirmed that shape distortion during sintering marginally increases with an increase in the friction coefficient. Assuming a heterogeneous initial density distribution, the simulation results showed good agreement in predicting the concave deformation patterns observed in many samples (~0.45 mm, less than 5% error along the y-direction). This work proposes novel insight into the influence of tray roughness and the combined effect of friction and density distribution on shape distortion during sintering.

MetalsVol. 16(11)
Université Toulouse III - Paul Sabatier (FR), University of Trento (IT), Centre Interuniversitaire de Recherche et d’Ingénierie des Matériaux (FR), Université de Toulouse (FR)
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon