Vibration-Based Mass Sensing with Functionally Graded Graphene-Reinforced Piezoelectric Microcantilevers in Air and Liquid
Abstract Resonant microcantilevers are widely used for mass sensing, yet the effects of material architecture and operating medium remain unclear. This study develops an analytical model of a multilayer graphene nanoplatelet-reinforced composite (GPLRC) piezoelectric microcantilever with a narrowed tip. The formulation combines Euler–Bernoulli beam theory, a modified Halpin–Tsai model, a piecewise modal solution incorporating adsorbed mass, and a string-of-spheres hydrodynamic model. Uniform (U) and functionally graded (X, O, A) platelet distributions are investigated in epoxy, polyamide 6 (PA6), and polypropylene (PP) matrices. Validation against published measurements yields deviations of 2.2% in air and 0.3–2.3% in liquids. Adsorption of a 20ng particle decreases resonance frequency. The relative shift in water is nearly ten times smaller than in air and decreases with increasing glycerol concentration. O-GPLRC produces the largest frequency shift in both media. PP performs best in air, whereas PA6 performs best in liquids. Amplitude-based responses rank configurations differently from frequency-based metrics. Higher platelet content reduces relative frequency shifts through stiffening. Sobol’ analysis identifies platelet width and thickness as dominant parameters, contributing 52–54% and 41–44% of variance, respectively, while length contributes less than 5%. These findings support optimizing material architecture, matrix, medium, and readout metric.
Authors
- Reza Ghaderi (ORCID: https://orcid.org/0000-0001-9676-6243)
Institutions
- Islamic Azad University of Shahrekord (IR)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11552084/v1
- Primary Topic
- Advanced MEMS and NEMS Technologies
- Type
- preprint