Graphene-modified Epoxy Coatings for Passive Corrosion Protection of Reinforcing Steel in Concrete: Mechanisms, Performance Evaluation, and Dosage Optimization

Chloride-induced corrosion of reinforcing steel is a major durability concern for reinforced concrete structures, especially in marine, coastal, and salt-affected areas. A common passive corrosion mitigation method is the use of conventional epoxy-coated reinforcement; however, its durability is often degraded by coating imperfections, microcracking, inadequate adhesion in humid environments, and the progressive ingress of water, oxygen, and chloride ions. Graphene-modified epoxy coatings have recently attracted considerable attention as advanced nanocomposite systems due to the exceptional impermeability, high aspect ratio, hydrophobicity, and mechanical reinforcement potential of graphene-based materials. This review critically evaluates the progress in graphene-modified epoxy coatings for passive corrosion protection of reinforcing steel in concrete, discussing protection mechanisms, coating application, electrochemical performance, hydrophobicity, microstructural features, dispersion quality, and optimum dosage. Electrochemical impedance spectroscopy, salt spray test, potentiodynamic polarization, water contact angle measurement, and microscopic analysis data reveal that well-dispersed graphene can enhance the coating resistance, decrease corrosion current density, delay rust formation, improve moisture resistance, and enhance barrier stability in comparison with traditional epoxy coatings. The improvements are mainly due to the tortuous diffusion paths, lower permeability, higher hydrophobicity, crack-bridging mechanisms, and the good interfacial compatibility between graphene, epoxy, and the steel substrate. The coating performance is greatly affected by the type of graphene, filler content, dispersion method, coating thickness, application method, curing conditions, and exposure environment. Promising laboratory results notwithstanding, there is still a lack of full-scale field validation, extensive testing on reinforced concrete, analysis of the bond between coating and concrete, environmental evaluation, and scalable dispersion techniques. This review presents a framework for improving graphene-modified epoxy coatings as long-lasting, sustainable protective systems for reinforced concrete structures.

Authors

Institutions

Publication Details

Journal
The Open Civil Engineering Journal
Published
2026-11-13
DOI
https://doi.org/10.2174/01187414955548261103055751
Primary Topic
Concrete Corrosion and Durability
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Graphene-modified Epoxy Coatings for Passive Corrosion Protection of Reinforcing Steel in Concrete: Mechanisms, Performance Evaluation, and Dosage Optimization

Nazirah Mohd Apandi, Zaid Hashim, Warid Wazien Ahmad Zailani, Khairul Nazhan Khairul Izwan et al.
2 links
The Open Civil Engineering Journal
Concrete Corrosion and Durability
article

Graphene-modified Epoxy Coatings for Passive Corrosion Protection of Reinforcing Steel in Concrete: Mechanisms, Performance Evaluation, and Dosage Optimization

Nazirah Mohd Apandi, Zaid Hashim, Warid Wazien Ahmad Zailani, Khairul Nazhan Khairul Izwan, Nor Azian Aziz, Norhaida Mohamed
article en

Abstract

Chloride-induced corrosion of reinforcing steel is a major durability concern for reinforced concrete structures, especially in marine, coastal, and salt-affected areas. A common passive corrosion mitigation method is the use of conventional epoxy-coated reinforcement; however, its durability is often degraded by coating imperfections, microcracking, inadequate adhesion in humid environments, and the progressive ingress of water, oxygen, and chloride ions. Graphene-modified epoxy coatings have recently attracted considerable attention as advanced nanocomposite systems due to the exceptional impermeability, high aspect ratio, hydrophobicity, and mechanical reinforcement potential of graphene-based materials. This review critically evaluates the progress in graphene-modified epoxy coatings for passive corrosion protection of reinforcing steel in concrete, discussing protection mechanisms, coating application, electrochemical performance, hydrophobicity, microstructural features, dispersion quality, and optimum dosage. Electrochemical impedance spectroscopy, salt spray test, potentiodynamic polarization, water contact angle measurement, and microscopic analysis data reveal that well-dispersed graphene can enhance the coating resistance, decrease corrosion current density, delay rust formation, improve moisture resistance, and enhance barrier stability in comparison with traditional epoxy coatings. The improvements are mainly due to the tortuous diffusion paths, lower permeability, higher hydrophobicity, crack-bridging mechanisms, and the good interfacial compatibility between graphene, epoxy, and the steel substrate. The coating performance is greatly affected by the type of graphene, filler content, dispersion method, coating thickness, application method, curing conditions, and exposure environment. Promising laboratory results notwithstanding, there is still a lack of full-scale field validation, extensive testing on reinforced concrete, analysis of the bond between coating and concrete, environmental evaluation, and scalable dispersion techniques. This review presents a framework for improving graphene-modified epoxy coatings as long-lasting, sustainable protective systems for reinforced concrete structures.

The Open Civil Engineering JournalVol. 20(1)
Universiti Teknologi MARA System (MY), Centre of Excellence for Engineering and Technology (CREaTE) (MY), Universiti Teknologi MARA (MY)
Universiti Teknologi MARA
Concrete Corrosion and Durability
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon