Conceptual design of a practical field-reversed configuration magneto- inertial fusion reactor
Abstract Magneto-inertial fusion (MIF) is expected to offer the dual advantages of lower cost and a more compact reactor design than both magnetic confinement fusion (MCF) and inertial confinement fusion (ICF). However, existing MIF reactor designs either require destructively high magnetic fields (B. Wang et al., Phys. Rev. E 114, 015211, 2026) or unrealistically long plasma confinement times (T. Nicolas et al., J. Fusion Energy 45:24, 2026) to reach ignition. This article presents a practical MIF reactor design based on acceleration and compression of field-reversed configuration (FRC) plasmas. The most conservative scaling law for FRC plasma confinement time is used to ensure the physics design robustness, and an engineering limit of < 100 T is adopted to enable non-destructive repetitive operation. The unique structural design ensures FRC stability throughout the compression process, and a practical path to ignition is expected at moderate densities (~ 10 24 m − 3 ). The simple relationship between the minimum required magnetic field for a given confinement time is also presented as “the D-diagram” which can be used as a guide for the design of any fusion reactors with the goal to achieve ignition. The effective kinetic wall compression method used in the design has higher plasma heating efficiency than traditional wall compression and avoids the impurity contamination problem.
Authors
- B. H. Deng
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11584625/v1
- Primary Topic
- Magnetic confinement fusion research
- Type
- preprint