Mechanically stable, endothelializable vascular graft scaffolds fabricated by melt electrowriting

Conventional synthetic vascular grafts, especially for small-diameter vessels (<6 mm), still face critical limitations in clinical settings, as around 75% of synthetic conduits fail within 3 years of implantation mostly due to the missing luminal endothelial cell layer, leading to, e.g ., thrombosis, calcification, and intimal hyperplasia. Mechanical mismatch between the graft and native tissue can lead to severe clinical complications. Thus, tissue-engineered vascular grafts have become of wide interest as they aim to overcome clinical challenges of synthetic grafts by mimicking the qualities of native tissue. Here, we developed a framework for the fabrication of a customizable, 3D-printed tubular scaffold structure consisting of poly- ε-caprolactone (PCL) with controlled mechanical properties mimicking those of native arteries. Design adjustments regarding the geometric properties of the 3D-printed scaffolds were made by varying winding angle, fiber diameter, and fiber distance. A fibrin compression molding technique was adapted to produce a leak-free and cell-adherent vascular graft structure that was later seeded with endothelial cells and cultivated under pulsatile dynamic conditions of up to 20 dyn*cm -2 . The final scaffold had a fiber diameter of 128 μm, a winding angle of 52.5°, and a fiber distance of 500 µm. Printed with long-chain PCL showed a radial Young’s modulus of 1.12 ± 0.35 MPa and a radial tensile strength of 3.89 ± 0.81 MPa, similar to that of native arteries (2.45 ± 0.79 MPa). The fibrin-PCL scaffold showed a burst pressure of 1,600.4 ± 502.85 mmHg, a suture strength of 1.62 ± 0.29 N, a longitudinal tensile strength similar to native arteries (1.07 ± 0.22 MPa), whereas radial tensile strength was decreased (0.80 ± 0.20 MPa). Finally, successful endothelialization of the fibrin PCL graft under pulsatile and dynamic cultivation (20 dyn*cm -2 ) over 7 days was demonstrated, with cell alignment according to the direction of flow. Additionally, the cultivated graft still retained sufficient biomechanical properties with a radial Young’s modulus of 3.03 MPa and a radial tensile strength of 1.56 MPa. To the best of our knowledge, this study demonstrates the successful fabrication of an endothelialized graft that possesses mechanical properties similar to those of native arteries.

Authors

Institutions

Publication Details

Journal
Frontiers in Bioengineering and Biotechnology
Published
2026-11-13
DOI
https://doi.org/10.3389/fbioe.2026.1963671
Primary Topic
Electrospun Nanofibers in Biomedical Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Mechanically stable, endothelializable vascular graft scaffolds fabricated by melt electrowriting

Florian Helms, Jana Krueger, Patrick Stadler, Cornelia A. Blume et al.
3 links
Frontiers in Bioengineering and Biotechnology
Electrospun Nanofibers in Biomedical Applications
article

Mechanically stable, endothelializable vascular graft scaffolds fabricated by melt electrowriting

Florian Helms, Jana Krueger, Patrick Stadler, Cornelia A. Blume, Sebastian Heene, Mathias H. Wilhelmi, Jannis Renzelmann, Melanie Klingenberg, Jannik Ahrens, Annika Baudisch
article en

Abstract

Conventional synthetic vascular grafts, especially for small-diameter vessels (<6 mm), still face critical limitations in clinical settings, as around 75% of synthetic conduits fail within 3 years of implantation mostly due to the missing luminal endothelial cell layer, leading to, e.g ., thrombosis, calcification, and intimal hyperplasia. Mechanical mismatch between the graft and native tissue can lead to severe clinical complications. Thus, tissue-engineered vascular grafts have become of wide interest as they aim to overcome clinical challenges of synthetic grafts by mimicking the qualities of native tissue. Here, we developed a framework for the fabrication of a customizable, 3D-printed tubular scaffold structure consisting of poly- ε-caprolactone (PCL) with controlled mechanical properties mimicking those of native arteries. Design adjustments regarding the geometric properties of the 3D-printed scaffolds were made by varying winding angle, fiber diameter, and fiber distance. A fibrin compression molding technique was adapted to produce a leak-free and cell-adherent vascular graft structure that was later seeded with endothelial cells and cultivated under pulsatile dynamic conditions of up to 20 dyn*cm -2 . The final scaffold had a fiber diameter of 128 μm, a winding angle of 52.5°, and a fiber distance of 500 µm. Printed with long-chain PCL showed a radial Young’s modulus of 1.12 ± 0.35 MPa and a radial tensile strength of 3.89 ± 0.81 MPa, similar to that of native arteries (2.45 ± 0.79 MPa). The fibrin-PCL scaffold showed a burst pressure of 1,600.4 ± 502.85 mmHg, a suture strength of 1.62 ± 0.29 N, a longitudinal tensile strength similar to native arteries (1.07 ± 0.22 MPa), whereas radial tensile strength was decreased (0.80 ± 0.20 MPa). Finally, successful endothelialization of the fibrin PCL graft under pulsatile and dynamic cultivation (20 dyn*cm -2 ) over 7 days was demonstrated, with cell alignment according to the direction of flow. Additionally, the cultivated graft still retained sufficient biomechanical properties with a radial Young’s modulus of 3.03 MPa and a radial tensile strength of 1.56 MPa. To the best of our knowledge, this study demonstrates the successful fabrication of an endothelialized graft that possesses mechanical properties similar to those of native arteries.

Frontiers in Bioengineering and BiotechnologyVol. 14
Leibniz University Hannover (DE), Medizinische Hochschule Hannover (DE), St. Bernward Krankenhaus (DE)
Deutsche Forschungsgemeinschaft
Good health and well-being
Electrospun Nanofibers in Biomedical Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon