Preparation and Characterization of Micro-Cellulose and Sub-Micro Nano-Cellulose Particles from Mango Peel Waste

Cellulosic biomaterials, such as mango peel, are waste by-products of the food processing industry. The extraction of cellulose from these waste materials could provide economic value while contributing to environmental sustainability through waste valorization. In this study, micro-cellulose was extracted from mango peel by hot water digestion followed by alkaline digestion. The resulting residue was mixed with ethanol, centrifuged and freeze-dried to obtain micro-cellulose. The extracted freeze-dried micro-cellulose contained 85 g/100 g holocellulose. Nano-cellulose was subsequently prepared by disc milling the micro-cellulose for 100 s, successively three times. The average particle sizes of micro-cellulose and nano-cellulose were 74 µm and 320 nm, respectively. Scanning Electron Microscopy (SEM) micrographs showed an irregular and shriveled morphology with a porous interconnected network. Transmission Electron Microscopy (TEM) micrographs showed that the nano-cellulose particles exhibited spherical, triangular and brick shapes. Water absorption decreased from 86 to 81 g/g dry solids, whereas solubility increased from 6 to 11 g/L when micro-cellulose was transformed into nano-cellulose (p < 0.05). The BET-monolayer moisture of micro-cellulose (0.041 g/g dry solids) and nano-cellulose (0.038 g/g dry solids) were significantly different (p < 0.02). Transformation of micro-cellulose to nano-cellulose resulted in an increase in the onset glass transition temperature from 140 °C to 146 °C, while relaxation at the glass transition decreased from 102 J/g to 63 J/g. Similar trends were also observed in the solids-melting peak temperature and enthalpy. Crystallinity of micro-cellulose was 80.7%, whereas that of nano-cellulose was 76.5%. The bands at 1262 cm−1 and 670 cm−1 shifted to high, and 1378 cm−1 and 1233 cm−1 shifted to low in the case of nano-cellulose. Fourier Transform Infrared (FTIR) band intensities at 3450 cm−1, 1562 cm−1, 963 cm−1, 897 cm−1, 838 cm−1, and 670 cm−1 increased, whereas the bands at 1646 cm−1, 1378 cm−1, 1233 cm−1, 1200 cm−1, and 998 cm−1 decreased when micro-cellulose was converted to nano-cellulose. These findings suggest that some molecular bonds in functional groups were disrupted. Physicochemical and thermal properties, together with the extent of functional group alterations, indicated that the extracted micro-cellulose and nano-cellulose from mango peel have potential for applications in food products, biomaterials, edible coatings and biodegradable packaging.

Authors

Institutions

Publication Details

Journal
Molecules
Published
2026-11-13
DOI
https://doi.org/10.3390/molecules31224096
Primary Topic
Advanced Cellulose Research Studies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Preparation and Characterization of Micro-Cellulose and Sub-Micro Nano-Cellulose Particles from Mango Peel Waste

Imran Khan, Asgar Farahnaky, Malik Altaf Hussain, Mohamed Abdullah Al-Kindi et al.
1 links
Molecules
Advanced Cellulose Research Studies
article

Preparation and Characterization of Micro-Cellulose and Sub-Micro Nano-Cellulose Particles from Mango Peel Waste

Imran Khan, Asgar Farahnaky, Malik Altaf Hussain, Mohamed Abdullah Al-Kindi, Yanyan Lao, Mohammad Shafiur Rahman, Nasser Abdullah Al-Habsi, Azza Al-Siyabi
article en

Abstract

Cellulosic biomaterials, such as mango peel, are waste by-products of the food processing industry. The extraction of cellulose from these waste materials could provide economic value while contributing to environmental sustainability through waste valorization. In this study, micro-cellulose was extracted from mango peel by hot water digestion followed by alkaline digestion. The resulting residue was mixed with ethanol, centrifuged and freeze-dried to obtain micro-cellulose. The extracted freeze-dried micro-cellulose contained 85 g/100 g holocellulose. Nano-cellulose was subsequently prepared by disc milling the micro-cellulose for 100 s, successively three times. The average particle sizes of micro-cellulose and nano-cellulose were 74 µm and 320 nm, respectively. Scanning Electron Microscopy (SEM) micrographs showed an irregular and shriveled morphology with a porous interconnected network. Transmission Electron Microscopy (TEM) micrographs showed that the nano-cellulose particles exhibited spherical, triangular and brick shapes. Water absorption decreased from 86 to 81 g/g dry solids, whereas solubility increased from 6 to 11 g/L when micro-cellulose was transformed into nano-cellulose (p < 0.05). The BET-monolayer moisture of micro-cellulose (0.041 g/g dry solids) and nano-cellulose (0.038 g/g dry solids) were significantly different (p < 0.02). Transformation of micro-cellulose to nano-cellulose resulted in an increase in the onset glass transition temperature from 140 °C to 146 °C, while relaxation at the glass transition decreased from 102 J/g to 63 J/g. Similar trends were also observed in the solids-melting peak temperature and enthalpy. Crystallinity of micro-cellulose was 80.7%, whereas that of nano-cellulose was 76.5%. The bands at 1262 cm−1 and 670 cm−1 shifted to high, and 1378 cm−1 and 1233 cm−1 shifted to low in the case of nano-cellulose. Fourier Transform Infrared (FTIR) band intensities at 3450 cm−1, 1562 cm−1, 963 cm−1, 897 cm−1, 838 cm−1, and 670 cm−1 increased, whereas the bands at 1646 cm−1, 1378 cm−1, 1233 cm−1, 1200 cm−1, and 998 cm−1 decreased when micro-cellulose was converted to nano-cellulose. These findings suggest that some molecular bonds in functional groups were disrupted. Physicochemical and thermal properties, together with the extent of functional group alterations, indicated that the extracted micro-cellulose and nano-cellulose from mango peel have potential for applications in food products, biomaterials, edible coatings and biodegradable packaging.

MoleculesVol. 31(22)
UNSW Sydney (AU), Sultan Qaboos University (OM), Western Sydney University (AU), RMIT University (AU)
Responsible consumption and production
Advanced Cellulose Research Studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon