Nickel Nanoparticle-Modified Carbon Nanotube Films for Energy-Efficient Out-of-Oven Curing and Damage Self-Sensing of Basalt Fiber/Epoxy Composites

Carbon nanotube (CNT) films can serve as a Joule heating source for low-energy out-of-oven curing, but their electrothermal performance is limited by the CNT-CNT junction resistance. Metal nanoparticles can bridge adjacent CNTs and reduce the junction resistance, but at excessively high concentrations, particle agglomeration offsets this effect. In this study, a nickel (Ni) nanoparticle-modified CNT/thermoplastic polyurethane (TPU) conductive film was prepared and used for Joule heating curing and damage self-sensing of basalt fiber-reinforced epoxy composites. Within the investigated range of Ni dispersion concentrations, the conductivity of the film increases first and then decreases. To interpret this behavior, a phenomenological competition model and a Monte Carlo resistor-network model were established, attributing this nonmonotonic change to the competition between metallic bridging and agglomeration loss. Based on the modeling and experimental results, 2 mg·mL-1 was identified as the Ni concentration with the best overall performance within the investigated range. The resulting film reached 80.96 °C at 9 V and maintained uniform and stable heating during 3600 s of continuous heating and 30 heating-cooling cycles. Subsequently, basalt fiber-reinforced polymer composites (BFRPs) were prepared using the conductive film via an out-of-oven curing process. The BFRPs exhibited mechanical properties similar to those of oven-cured samples while additionally acquiring electrothermal and damage self-sensing functions. This study provides a viable design strategy for the development of basalt fiber-reinforced composites with both electrothermal and damage self-sensing capabilities.

Authors

Institutions

Publication Details

Journal
ACS Applied Materials & Interfaces
Published
2026-11-13
DOI
https://doi.org/10.1021/acsami.6c19334
Primary Topic
Carbon Nanotubes in Composites
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Nickel Nanoparticle-Modified Carbon Nanotube Films for Energy-Efficient Out-of-Oven Curing and Damage Self-Sensing of Basalt Fiber/Epoxy Composites

Xuezhong Zhang, Dong Xiang, Hui Li, Chunxia Zhao et al.
5 links
ACS Applied Materials & Interfaces
Carbon Nanotubes in Composites
article

Nickel Nanoparticle-Modified Carbon Nanotube Films for Energy-Efficient Out-of-Oven Curing and Damage Self-Sensing of Basalt Fiber/Epoxy Composites

Xuezhong Zhang, Dong Xiang, Hui Li, Chunxia Zhao, Xinyue Wang, Guoqian Xie, Bin Wang
article en

Abstract

Carbon nanotube (CNT) films can serve as a Joule heating source for low-energy out-of-oven curing, but their electrothermal performance is limited by the CNT-CNT junction resistance. Metal nanoparticles can bridge adjacent CNTs and reduce the junction resistance, but at excessively high concentrations, particle agglomeration offsets this effect. In this study, a nickel (Ni) nanoparticle-modified CNT/thermoplastic polyurethane (TPU) conductive film was prepared and used for Joule heating curing and damage self-sensing of basalt fiber-reinforced epoxy composites. Within the investigated range of Ni dispersion concentrations, the conductivity of the film increases first and then decreases. To interpret this behavior, a phenomenological competition model and a Monte Carlo resistor-network model were established, attributing this nonmonotonic change to the competition between metallic bridging and agglomeration loss. Based on the modeling and experimental results, 2 mg·mL-1 was identified as the Ni concentration with the best overall performance within the investigated range. The resulting film reached 80.96 °C at 9 V and maintained uniform and stable heating during 3600 s of continuous heating and 30 heating-cooling cycles. Subsequently, basalt fiber-reinforced polymer composites (BFRPs) were prepared using the conductive film via an out-of-oven curing process. The BFRPs exhibited mechanical properties similar to those of oven-cured samples while additionally acquiring electrothermal and damage self-sensing functions. This study provides a viable design strategy for the development of basalt fiber-reinforced composites with both electrothermal and damage self-sensing capabilities.

ACS Applied Materials & Interfaces
Southwest Petroleum University (CN)
National Natural Science Foundation of China, Sichuan Province Science and Technology Support Program, Chengdu Science and Technology Program
Carbon Nanotubes in Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon