Effects of research octane number and octane sensitivity on Knock-Limited and Propagation-Limited combustion in a Lean-Burn DISI engine

The pursuit of higher thermal efficiency in next-generation spark-ignition (SI) engines is driving the development of ultra-lean combustion, where intensified flame quenching and knock create new challenges for fuel formulation. This study investigated the combined effects of research octane number (RON) and octane sensitivity (OS = RON – MON, with MON being the motor octane number) on performance, stability, and emissions in a 2.5-L GDI engine at 2000 rpm and 9 bar IMEP over λ = 1.0–1.9. Nine PRF/TPRF-based surrogates covering RON 95/100/105 and nominal OS ≈ 0/6/12 (OS ≈ 5–12 at RON 105), plus a Euro-6 E10 reference, were tested. Ignition timing was varied up to either maximum brake torque (MBT) or knock-limited spark advance (KLSA). At RON 95, the higher-OS formulations operated with approximately 1–5 CAD more spark advance than the OS = 0 fuel, bringing combustion phasing closer to the reference target. Higher OS also allowed CA50 to reach MBT at λ ≈ 1.5–1.6, shortened the burn duration by ∼ 1–2 CAD, and increased both peak pressure and efficiency. At RON ≥ 100, the engine operated near MBT over most of the λ range; the higher-OS formulations reached the reference CA50 with spark timing retarded by only ∼ 1–2 CAD relative to the lowest-OS fuel in each RON group, with negligible differences in CA50, ignition delay and burn duration. With leaner mixture, ignition delay and burn duration increased for all fuels; by λ ≈ 1.7, HRR peaks dropped by ∼ 40 % relative to stoichiometric operation and pressure/HRR traces converged within each RON class, indicating heat release governed primarily by mixture leanness. Combustion stability (COV IMEP ) stayed below 5 % to λ ≈ 1.75–1.80 for all fuels, extending to ≈1.85 for high-OS RON-95 blends. NOx peaked near λ ≈ 1.1 and fell by ∼ 93–97 % at λ ≈ 1.8; CO was minimized just lean of stoichiometric with Euro-6 E10, while HC rose sharply beyond λ ≳ 1.6. CO 2 emissions decreased nearly linearly with λ, and indicated thermal efficiency peaked at ∼ 44–46 % for λ ≈ 1.6–1.8 before falling as stability declined. The higher-OS formulations were most beneficial when combustion phasing was knock-limited (notably at RON 95), whereas at high RON and under ultra-lean operation, performance appeared to be limited by flame-kernel development and propagation rather than by octane quality.

Authors

Institutions

Publication Details

Journal
Fuel
Published
2026-11-13
DOI
https://doi.org/10.1016/j.fuel.2026.142072
Primary Topic
Advanced Combustion Engine Technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of research octane number and octane sensitivity on Knock-Limited and Propagation-Limited combustion in a Lean-Burn DISI engine

Mebin Samuel Panithasan, S. Mani Sarathy, Inna Gorbatenko, James W. G. Turner et al.
1 links
Fuel
Advanced Combustion Engine Technologies
article

Effects of research octane number and octane sensitivity on Knock-Limited and Propagation-Limited combustion in a Lean-Burn DISI engine

Mebin Samuel Panithasan, S. Mani Sarathy, Inna Gorbatenko, James W. G. Turner, Abdullah S. AlRamadan, Shashank S. Nagaraja, Tawfik Badawy, Jaeheun Kim, Junseok Chang, Jonghyeok Lee, Donghee Han
article en

Abstract

The pursuit of higher thermal efficiency in next-generation spark-ignition (SI) engines is driving the development of ultra-lean combustion, where intensified flame quenching and knock create new challenges for fuel formulation. This study investigated the combined effects of research octane number (RON) and octane sensitivity (OS = RON – MON, with MON being the motor octane number) on performance, stability, and emissions in a 2.5-L GDI engine at 2000 rpm and 9 bar IMEP over λ = 1.0–1.9. Nine PRF/TPRF-based surrogates covering RON 95/100/105 and nominal OS ≈ 0/6/12 (OS ≈ 5–12 at RON 105), plus a Euro-6 E10 reference, were tested. Ignition timing was varied up to either maximum brake torque (MBT) or knock-limited spark advance (KLSA). At RON 95, the higher-OS formulations operated with approximately 1–5 CAD more spark advance than the OS = 0 fuel, bringing combustion phasing closer to the reference target. Higher OS also allowed CA50 to reach MBT at λ ≈ 1.5–1.6, shortened the burn duration by ∼ 1–2 CAD, and increased both peak pressure and efficiency. At RON ≥ 100, the engine operated near MBT over most of the λ range; the higher-OS formulations reached the reference CA50 with spark timing retarded by only ∼ 1–2 CAD relative to the lowest-OS fuel in each RON group, with negligible differences in CA50, ignition delay and burn duration. With leaner mixture, ignition delay and burn duration increased for all fuels; by λ ≈ 1.7, HRR peaks dropped by ∼ 40 % relative to stoichiometric operation and pressure/HRR traces converged within each RON class, indicating heat release governed primarily by mixture leanness. Combustion stability (COV IMEP ) stayed below 5 % to λ ≈ 1.75–1.80 for all fuels, extending to ≈1.85 for high-OS RON-95 blends. NOx peaked near λ ≈ 1.1 and fell by ∼ 93–97 % at λ ≈ 1.8; CO was minimized just lean of stoichiometric with Euro-6 E10, while HC rose sharply beyond λ ≳ 1.6. CO 2 emissions decreased nearly linearly with λ, and indicated thermal efficiency peaked at ∼ 44–46 % for λ ≈ 1.6–1.8 before falling as stability declined. The higher-OS formulations were most beneficial when combustion phasing was knock-limited (notably at RON 95), whereas at high RON and under ultra-lean operation, performance appeared to be limited by flame-kernel development and propagation rather than by octane quality.

FuelVol. 431
Cairo University (EG), Hyundai Motor Group (South Korea) (KR), Kingston University London (GB), Saudi Aramco (Saudi Arabia) (SA), Hanyang University (KR), King Abdullah University of Science and Technology (SA)
Hyundai Motor Group, Saudi Aramco
Advanced Combustion Engine Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon