Effect of Zein-Coated Magnesium Oxide Nanoparticle Incorporation on the Shear Bond Strength of Different Resin Composites After Thermocycling

Objectives: Studies have shown that nanoparticles can impart beneficial properties when integrated into resin composites; however, it remains unclear how this affects shear bond strength. This study aimed to evaluate the effects of composite formulation and zein-coated magnesium oxide nanoparticle (zMgO NP) concentration on shear bond strength (SBS) and failure mode following thermocycling. Methods: A total of 180 extracted human molars were randomly allocated among four composite formulations and three zMgO NP concentrations (0%, 0.5%, and 1%; n = 15). Composite cylinders were bonded to prepared dentin surfaces and thermocycled for 10,000 cycles between 5 °C and 55 °C. SBS was analyzed using two-way ANOVA and post hoc multiple comparisons with Tukey’s test. Failure modes were assessed stereomicroscopically and analyzed using the chi-square test. Results: The SBS of the modified composites in all groups significantly increased, with the 0.5% zMgO NP groups exhibiting the highest SBS. The 0.5% zMgO NPs N-Ceram group had the highest SBS overall. The unmodified Z350 composite exhibited the highest adhesive failure, while the control N-Flow composite demonstrated the highest cohesive failure. The modified conventional and flowable composites showed initially lower adhesive failure, which increased progressively as zMgO NPs increased. The bulk-fill composite initially showed higher adhesive failure, with the 0.5% group demonstrating lower adhesive failure and the 1% group exhibiting increased adhesive failure. Conclusions: Adding zMgO NPs to resin composites improved SBS after thermocycling, with material- and concentration-dependent differences in failure-mode analysis. Further validation studies are needed to verify clinical viability.

Authors

Institutions

Publication Details

Journal
Bioengineering
Published
2026-11-13
DOI
https://doi.org/10.3390/bioengineering13111353
Primary Topic
Dental materials and restorations
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Zein-Coated Magnesium Oxide Nanoparticle Incorporation on the Shear Bond Strength of Different Resin Composites After Thermocycling

Dina AlSharif, Ghada H. Naguib, Mohamed T. Hamed, Sarah Alqarni et al.
3 links
Bioengineering
Dental materials and restorations
article

Effect of Zein-Coated Magnesium Oxide Nanoparticle Incorporation on the Shear Bond Strength of Different Resin Composites After Thermocycling

Dina AlSharif, Ghada H. Naguib, Mohamed T. Hamed, Sarah Alqarni, Rabab Aljawi, Jumana Mazhar, Abeer M. Alnowaiser
article en

Abstract

Objectives: Studies have shown that nanoparticles can impart beneficial properties when integrated into resin composites; however, it remains unclear how this affects shear bond strength. This study aimed to evaluate the effects of composite formulation and zein-coated magnesium oxide nanoparticle (zMgO NP) concentration on shear bond strength (SBS) and failure mode following thermocycling. Methods: A total of 180 extracted human molars were randomly allocated among four composite formulations and three zMgO NP concentrations (0%, 0.5%, and 1%; n = 15). Composite cylinders were bonded to prepared dentin surfaces and thermocycled for 10,000 cycles between 5 °C and 55 °C. SBS was analyzed using two-way ANOVA and post hoc multiple comparisons with Tukey’s test. Failure modes were assessed stereomicroscopically and analyzed using the chi-square test. Results: The SBS of the modified composites in all groups significantly increased, with the 0.5% zMgO NP groups exhibiting the highest SBS. The 0.5% zMgO NPs N-Ceram group had the highest SBS overall. The unmodified Z350 composite exhibited the highest adhesive failure, while the control N-Flow composite demonstrated the highest cohesive failure. The modified conventional and flowable composites showed initially lower adhesive failure, which increased progressively as zMgO NPs increased. The bulk-fill composite initially showed higher adhesive failure, with the 0.5% group demonstrating lower adhesive failure and the 1% group exhibiting increased adhesive failure. Conclusions: Adding zMgO NPs to resin composites improved SBS after thermocycling, with material- and concentration-dependent differences in failure-mode analysis. Further validation studies are needed to verify clinical viability.

BioengineeringVol. 13(11)
Harvard University (US), Cairo University (EG), King Abdulaziz University (SA)
Good health and well-being
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon