Effect of scanner type and preparation design on the accuracy of digital impressions for maxillary anterior veneers
Abstract Background The increasing adoption of intraoral scanning in restorative dentistry has made scan accuracy a critical determinant of clinical outcomes for laminate veneers. Although scan accuracy may be influenced by both the scanner used and the preparation design, evidence regarding these effects remains limited. To investigate the influence of both intraoral scanner (IOS) type and preparation design on the accuracy of digital impressions of maxillary anterior veneers. Methods Three maxillary typodonts were prepared with three different laminate veneer designs: window (W), bevel (B), and incisal overlap (IO). A total of 90 complete-arch intraoral scans were obtained using three IOSs (3Shape TRIOS 3, CEREC Omnicam, and Medit i500), with ten scans per subgroup. All scans were exported as standard tessellation language (STL) files. Accuracy was assessed using 3D analysis software program (Geomagic Control X). All STL files were individually registered to the reference scan via a best-fit algorithm, after which 3D deviations were determined and expressed as root mean square (RMS) values. Two-way analysis of variance (ANOVA) followed by post hoc comparison tests was performed to analyze the trueness and precision data (α = 0.05). Results Two-way ANOVA results revealed that both preparation design and scanner type significantly affected trueness and precision ( P < 0.001), whereas no significant interaction was observed between these two factors. For trueness, the 3Shape TRIOS 3 exhibited significantly better trueness than the CEREC Omnicam and Medit i500, and the IO design showed significantly better trueness than the W and B designs, with the B design yielding the highest RMS values. For precision, the 3Shape TRIOS 3 again showed significantly better precision than the other two scanners, while the IO design exhibited the highest precision and the W design the lowest. Conclusions Both the laminate veneer preparation design and the intraoral scanner type significantly influenced the accuracy of intraoral scans for maxillary anterior veneers. The IO design exhibited greater trueness than the W and B designs. The 3Shape TRIOS 3 showed significantly greater precision than the CEREC Omnicam and Medit i500. Therefore, both preparation design and scanner selection should be considered when optimizing the accuracy of digital impressions for laminate veneers.
Authors
- Runli Li
- YangYun Li
- Huanhuan Liu
- Yan Wang
Institutions
- Sun Yat-sen University (CN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11457686/v1
- Primary Topic
- Dental materials and restorations
- Type
- preprint
Funders
- Basic and Applied Basic Research Foundation of Guangdong Province