Development of sol–gel derived fluoridated hydroxyapatite/CaTiO3 composite coating on titanium implant

Abstract The difficulties in regulating the degradation of hydroxyapatite (HA)-coated titanium implants necessitate the development of innovative solutions to ensure their biological safety and long-term durability. This study aims to investigate the combined effects of CaTiO₃ incorporation and controlled fluoride substitution on HA-based composite coatings deposited onto Ti6Al4V substrates via sol–gel, with fluoridation levels systematically varied to assess their structural, mechanical, chemical, and biological performance. The phase composition, chemical bonding, elemental composition, and coating morphology were characterized by XRD, FTIR, XPS, and SEM, respectively. The composite coatings’ modulus of elasticity and hardness were investigated using a nanoindentation test, which has shown that CaTiO 3 and fluoride ions considerably improve the mechanical properties of the HA layers. Moreover, the adhesion strength of the composite coatings has shown significant improvement with increasing fluoridation degree. The investigation of the dissolution behavior showed that all fluoridated apatite coatings have a lower degradation rate, which indicates the possibility of tailoring the solubility of apatite structures in phosphate-buffered saline (PBS) as fluoride is incorporated. The potentiodynamic polarization test demonstrated that composite coatings on titanium alloy exhibit a lower corrosion rate than pure HA-coated samples. The fluoride-doped coatings exhibited antibacterial efficacy against S. aureus and E. coli bacteria. In vitro cellular responses evaluated with human osteosarcoma MG-63 cells revealed stimulated cell proliferation and differentiation activities as fluoride was incorporated. This study demonstrates that fluoridated apatite/CaTiO 3 composite coatings have several advantages over pure hydroxyapatite coatings in terms of mechanical properties, chemical stability, and cellular responses.

Authors

Institutions

Publication Details

Journal
Journal of Materials Science Materials in Medicine
Published
2026-11-13
DOI
https://doi.org/10.1007/s10856-026-07142-y
Primary Topic
Bone Tissue Engineering Materials
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Development of sol–gel derived fluoridated hydroxyapatite/CaTiO3 composite coating on titanium implant

David Rafaja, Hans Lesny, Alaa Jaafar, Pál Árki et al.
Journal of Materials Science Materials in Medicine
Bone Tissue Engineering Materials
article

Development of sol–gel derived fluoridated hydroxyapatite/CaTiO3 composite coating on titanium implant

David Rafaja, Hans Lesny, Alaa Jaafar, Pál Árki, Christian Schimpf, Marcel Mandel, Yvonne Joseph, Lutz Krüger, Christine Hecker
article en

Abstract

Abstract The difficulties in regulating the degradation of hydroxyapatite (HA)-coated titanium implants necessitate the development of innovative solutions to ensure their biological safety and long-term durability. This study aims to investigate the combined effects of CaTiO₃ incorporation and controlled fluoride substitution on HA-based composite coatings deposited onto Ti6Al4V substrates via sol–gel, with fluoridation levels systematically varied to assess their structural, mechanical, chemical, and biological performance. The phase composition, chemical bonding, elemental composition, and coating morphology were characterized by XRD, FTIR, XPS, and SEM, respectively. The composite coatings’ modulus of elasticity and hardness were investigated using a nanoindentation test, which has shown that CaTiO 3 and fluoride ions considerably improve the mechanical properties of the HA layers. Moreover, the adhesion strength of the composite coatings has shown significant improvement with increasing fluoridation degree. The investigation of the dissolution behavior showed that all fluoridated apatite coatings have a lower degradation rate, which indicates the possibility of tailoring the solubility of apatite structures in phosphate-buffered saline (PBS) as fluoride is incorporated. The potentiodynamic polarization test demonstrated that composite coatings on titanium alloy exhibit a lower corrosion rate than pure HA-coated samples. The fluoride-doped coatings exhibited antibacterial efficacy against S. aureus and E. coli bacteria. In vitro cellular responses evaluated with human osteosarcoma MG-63 cells revealed stimulated cell proliferation and differentiation activities as fluoride was incorporated. This study demonstrates that fluoridated apatite/CaTiO 3 composite coatings have several advantages over pure hydroxyapatite coatings in terms of mechanical properties, chemical stability, and cellular responses.

Journal of Materials Science Materials in MedicineVol. 37(1)
TU Bergakademie Freiberg (DE)
Europäischer Sozialfonds
Good health and well-being
Bone Tissue Engineering Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon