Full Pore System Characteristics, Fractal Dimensions, and Controlling Factors of Lacustrine Laminated Shale: Implications for Shale Oil Reservoirs in the Liaohe Depression, NE China

Abstract Clarifying the pore system of unconventional oil and gas reservoirs is essential for understanding hydrocarbon accumulation, improving recovery efficiency, and accurately assessing resource potential. However, research on pore systems in lacustrine shales remains limited, largely because the development of diverse laminas produces strong heterogeneity. In the current research, 20 samples from the fourth member of the Shahejie Formation in the Western Sag, Liaohe Depression of the Bohai Bay Basin were systematically characterized through a combined approach that includes CO2 adsorption, N2 adsorption, and high-pressure mercury intrusion (HPMI) experiments. Fractal dimensions for micropores (D1), mesopores (D2), and macropores (D3) were obtained using the V–S model for CO2 adsorption, the FHH model for N2 adsorption, and the MSP model for HPMI. The results demonstrate that the laminated shale is composed of light-colored layers rich in quartz, feldspar, calcite, and dolomite, which often alternate with darker layers primarily consisting of clay minerals and organic matter. The pore system of the laminated shale consists mainly of intergranular pores, intercrystalline pores, dissolution pores, and microfractures within the matrix, excluding pores associated with organic matter. In terms of pore volume, the pore system is primarily characterized by mesopores and macropores, while micropores significantly contribute to the specific surface area. The fractal dimensions are observed to range from 2.565 to 2.880 for D1, 2.458 to 2.659 for D2, and 2.929 to 2.999 for D3. This indicates that macropores display the greatest heterogeneity, followed by micropores, with mesopores being comparatively homogeneous. Correlation analysis indicates a strong positive relationship between D1 and both the micropore specific surface area and the pore volume of micropores. The correlation is influenced by the total organic carbon (TOC) content, thermal maturity (Ro), and clay mineral content. While D2 demonstrates a positive correlation with mesopore parameters, its overall heterogeneity remains relatively low due to compaction-induced homogenization. D3 is mainly affected by the dissolution of carbonates and the presence of microfracture networks, often reaching the theoretical upper limit in the majority of samples. The composition of minerals has a varying impact based on scale: clay minerals facilitate the formation of micropores and mesopores; felsic minerals contribute moderately to the volumes of mesopores and macropores; carbonate minerals encourage the formation of irregular dissolution pores, which in turn enhances D3. Within the low-mature to mature oil window (Ro = 0.65–1.00%), the pore system is predominantly controlled by the diagenetic evolution of the mineral matrix rather than organic matter pores. This research presents a quantitative framework for characterizing the complete pore system in laminated shale and provides insights for reservoir evaluation in lacustrine shale oil systems.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-13
DOI
https://doi.org/10.1021/acsomega.6c07738
Primary Topic
Hydrocarbon exploration and reservoir analysis
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Full Pore System Characteristics, Fractal Dimensions, and Controlling Factors of Lacustrine Laminated Shale: Implications for Shale Oil Reservoirs in the Liaohe Depression, NE China

X. Liu, Biao Sun, Tian Liu, Xiaoping Liu et al.
4 links
ACS Omega
Hydrocarbon exploration and reservoir analysis
article

Full Pore System Characteristics, Fractal Dimensions, and Controlling Factors of Lacustrine Laminated Shale: Implications for Shale Oil Reservoirs in the Liaohe Depression, NE China

X. Liu, Biao Sun, Tian Liu, Xiaoping Liu, Wenhui Xie, Zilong Zhang, Yongcheng Chen, Chang Chen, Xiaoguang Li
article en

Abstract

Abstract Clarifying the pore system of unconventional oil and gas reservoirs is essential for understanding hydrocarbon accumulation, improving recovery efficiency, and accurately assessing resource potential. However, research on pore systems in lacustrine shales remains limited, largely because the development of diverse laminas produces strong heterogeneity. In the current research, 20 samples from the fourth member of the Shahejie Formation in the Western Sag, Liaohe Depression of the Bohai Bay Basin were systematically characterized through a combined approach that includes CO2 adsorption, N2 adsorption, and high-pressure mercury intrusion (HPMI) experiments. Fractal dimensions for micropores (D1), mesopores (D2), and macropores (D3) were obtained using the V–S model for CO2 adsorption, the FHH model for N2 adsorption, and the MSP model for HPMI. The results demonstrate that the laminated shale is composed of light-colored layers rich in quartz, feldspar, calcite, and dolomite, which often alternate with darker layers primarily consisting of clay minerals and organic matter. The pore system of the laminated shale consists mainly of intergranular pores, intercrystalline pores, dissolution pores, and microfractures within the matrix, excluding pores associated with organic matter. In terms of pore volume, the pore system is primarily characterized by mesopores and macropores, while micropores significantly contribute to the specific surface area. The fractal dimensions are observed to range from 2.565 to 2.880 for D1, 2.458 to 2.659 for D2, and 2.929 to 2.999 for D3. This indicates that macropores display the greatest heterogeneity, followed by micropores, with mesopores being comparatively homogeneous. Correlation analysis indicates a strong positive relationship between D1 and both the micropore specific surface area and the pore volume of micropores. The correlation is influenced by the total organic carbon (TOC) content, thermal maturity (Ro), and clay mineral content. While D2 demonstrates a positive correlation with mesopore parameters, its overall heterogeneity remains relatively low due to compaction-induced homogenization. D3 is mainly affected by the dissolution of carbonates and the presence of microfracture networks, often reaching the theoretical upper limit in the majority of samples. The composition of minerals has a varying impact based on scale: clay minerals facilitate the formation of micropores and mesopores; felsic minerals contribute moderately to the volumes of mesopores and macropores; carbonate minerals encourage the formation of irregular dissolution pores, which in turn enhances D3. Within the low-mature to mature oil window (Ro = 0.65–1.00%), the pore system is predominantly controlled by the diagenetic evolution of the mineral matrix rather than organic matter pores. This research presents a quantitative framework for characterizing the complete pore system in laminated shale and provides insights for reservoir evaluation in lacustrine shale oil systems.

ACS Omega
China University of Petroleum, Beijing (CN)
National Natural Science Foundation of China
Hydrocarbon exploration and reservoir analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon