Process-Metallurgy Interactions in Solid and Metal-Cored Wire Weld Deposits
Advances in welding automation have become essential for reducing operational costs and increasing productivity, while the development of new filler materials enables improved weld performance through optimized chemical composition and microstructural control. Within this context, this study compares the operational, economic, and mechanical performance of a metal-cored wire (Tubrod 70 MC Ultra) with that of a solid wire (ER70S-6) under automated welding conditions. A synergic welding power source was employed with fixed voltage and current, varying only the travel speed to generate three heat-input levels (0.8, 1.0, and 1.2 kJ.mm⁻¹). In the first stage, bead-on-plate welds were produced on SAE 1020 steel using both conventional and pulsed GMAW modes to assess arc stability and economic indices. Subsequently, the conditions that yielded the highest arc stability for each wire/process combination were used to weld four butt joints of SAE 1010 steel for mechanical and metallurgical evaluation of the deposited weld metal. Statistical analysis demonstrated that the lowest heat-input condition promoted the highest arc stability for both welding modes and both wires. Mechanical and metallurgical examinations showed comparable performance between the solid and metal-cored wires, with all results meeting the requirements of the referenced standards.
Authors
- T.S. Luz
- A. G. S. Galdino (ORCID: https://orcid.org/0000-0002-5990-0287)
- R. Maziero
- O. F. Nascimento
Publication Details
- Journal
- Preprints.org
- Published
- 2026-11-13
- DOI
- https://doi.org/10.20944/preprints202611.1407.v1
- Primary Topic
- Welding Techniques and Residual Stresses
- Type
- preprint