Archwire-mediated torque transfer between adjacent brackets: an analytical model with finite element verification

Torque expression in orthodontic treatment is influenced by bracket play and the mechanical behaviour of the archwire. In a continuous archwire, the free wire segment between adjacent brackets behaves as a torsional spring whose stiffness depends on its length. This study developed a simple analytical framework to predict how interbracket distance and an assumed bracket-play angle together determine the model-predicted moment from a twisted wire segment under an assumed dead-zone model, and stated explicitly which parts of the framework were numerically verified and which were assumed. A one-dimensional lumped-parameter model treated the free wire span between two brackets as a linear torsional spring (Saint-Venant torsion of a rectangular cross-section) in series with an idealized backlash (dead-zone) element representing bracket play. Bracket play was not simulated; its values were taken from previously reported in vitro measurements for 0.019 × 0.025-inch stainless steel (SS) archwire (8.4°–18.7°). Only the elastic spring term was verified numerically, using four three-dimensional finite element analysis (FEA) models of an isolated, straight SS wire segment (0.019 × 0.025-inch; free lengths of 4, 8, 12 and 16 mm) solved in FreeCAD 1.0.2 with the CalculiX solver. Each model was fixed at one end, and a 5° rotation about the wire’s long axis was prescribed at the other end through a rigid-body coupling. No bracket slot, wire–slot contact, friction, ligation, teeth or multi-bracket assembly was modelled. Mesh convergence and peak von Mises stress were assessed. FEA reaction moments exceeded the analytical Saint-Venant predictions by 1.1%–1.9% across the four spans (isolated 0.019 × 0.025-inch wire, generic linear-elastic properties, 5° twist, end warping restrained). At the 5° twist used for the reported results, refining the mesh from 0.15 mm to 0.08 mm changed the reaction moment by less than 0.5% for both the shortest (4 mm) and longest (16 mm) spans. The peak von Mises stress in the 4 mm model at 5° was 1,135 MPa, below the reported yield strength of SS archwire. Combining the verified spring term with the assumed dead zone gives the model-predicted moment T_model(L, θ_applied) = (G·K/L) × (π/180) × max(0, θ_applied − θ_play). The stiffness ratios between short-span and long-span configurations (4/12 mm and 8/16 mm; about 3.0 and 2.0) follow directly from k ∝ 1/L. Predictions at excess twists beyond about 7° (4 mm span) are estimated to exceed the elastic range. Within the assumptions of the model, the torsional stiffness of the interbracket wire segment increases as span length decreases, so that a given activation beyond the assumed bracket-play angle would give a larger model-predicted moment on a shorter span.

Authors

Institutions

Publication Details

Journal
BMC Oral Health
Published
2026-11-13
DOI
https://doi.org/10.1186/s12903-026-10424-0
Primary Topic
Orthodontics and Dentofacial Orthopedics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Archwire-mediated torque transfer between adjacent brackets: an analytical model with finite element verification

Marakini Subrahmanya Ravi, Reuben Bensy Thomas, Subhiksha Easwar
1 links
BMC Oral Health
Orthodontics and Dentofacial Orthopedics
article

Archwire-mediated torque transfer between adjacent brackets: an analytical model with finite element verification

Marakini Subrahmanya Ravi, Reuben Bensy Thomas, Subhiksha Easwar
article en

Abstract

Torque expression in orthodontic treatment is influenced by bracket play and the mechanical behaviour of the archwire. In a continuous archwire, the free wire segment between adjacent brackets behaves as a torsional spring whose stiffness depends on its length. This study developed a simple analytical framework to predict how interbracket distance and an assumed bracket-play angle together determine the model-predicted moment from a twisted wire segment under an assumed dead-zone model, and stated explicitly which parts of the framework were numerically verified and which were assumed. A one-dimensional lumped-parameter model treated the free wire span between two brackets as a linear torsional spring (Saint-Venant torsion of a rectangular cross-section) in series with an idealized backlash (dead-zone) element representing bracket play. Bracket play was not simulated; its values were taken from previously reported in vitro measurements for 0.019 × 0.025-inch stainless steel (SS) archwire (8.4°–18.7°). Only the elastic spring term was verified numerically, using four three-dimensional finite element analysis (FEA) models of an isolated, straight SS wire segment (0.019 × 0.025-inch; free lengths of 4, 8, 12 and 16 mm) solved in FreeCAD 1.0.2 with the CalculiX solver. Each model was fixed at one end, and a 5° rotation about the wire’s long axis was prescribed at the other end through a rigid-body coupling. No bracket slot, wire–slot contact, friction, ligation, teeth or multi-bracket assembly was modelled. Mesh convergence and peak von Mises stress were assessed. FEA reaction moments exceeded the analytical Saint-Venant predictions by 1.1%–1.9% across the four spans (isolated 0.019 × 0.025-inch wire, generic linear-elastic properties, 5° twist, end warping restrained). At the 5° twist used for the reported results, refining the mesh from 0.15 mm to 0.08 mm changed the reaction moment by less than 0.5% for both the shortest (4 mm) and longest (16 mm) spans. The peak von Mises stress in the 4 mm model at 5° was 1,135 MPa, below the reported yield strength of SS archwire. Combining the verified spring term with the assumed dead zone gives the model-predicted moment T_model(L, θ_applied) = (G·K/L) × (π/180) × max(0, θ_applied − θ_play). The stiffness ratios between short-span and long-span configurations (4/12 mm and 8/16 mm; about 3.0 and 2.0) follow directly from k ∝ 1/L. Predictions at excess twists beyond about 7° (4 mm span) are estimated to exceed the elastic range. Within the assumptions of the model, the torsional stiffness of the interbracket wire segment increases as span length decreases, so that a given activation beyond the assumed bracket-play angle would give a larger model-predicted moment on a shorter span.

BMC Oral Health
Nitte University (IN)
Orthodontics and Dentofacial Orthopedics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon