Impact loads from freight wagon wheels with two non-condemnable tread defects: Modelling, field verification, and proposals for regulatory change

Wayside train monitoring systems based on measuring wheel–rail impact forces often register loads exceeding regulatory limits from wheels on which visual inspection finds only defects below the condemning size limits. This paper shows that such readings can be caused by the combined action of two or more non-condemnable tread defects. An impact interaction model built on A. Ya. Kogan’s theory, with the track represented as a beam on a Winkler elastic foundation, is adapted to several consecutively located defects using the time-delay theorem. Calculations are compared with data from the NEVA wayside monitoring system installed at Veimarn station of the Oktyabrskaya Railway (Russia). The medians of measured loads for wheels with double non-condemnable defects and for wheels with single condemnable defects are comparable in the examined groups of four and five wheels, differing by 9% with fully overlapping ranges. For wheelsets with inspection records, a response inversion is found, in which non-condemnable defects with sharp edges produce a larger signal in the 250–350 Hz diagnostic band than a large condemnable defect with a gently sloping entry, while the superposition of impact pulses from closely spaced defects can lead to a condemnable wheel being missed. The results agree with independent European studies favouring a force-based removal criterion over a geometric one. A closed-form classification of the interaction regimes of two defects is given through the flight length of the wheel, and the criterion is generalised to bogies of different design. For the 18-9855 bogie with a 25 t axle load, the inertial decoupling of the side frame reduces the effective impact mass from 926 to 725 kg, so that the track impact at the condemning flat depth is about 7% lower than for the 18–100 bogie despite the higher axle load, and the equivalent condemning depth is about 1.3 mm.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit
Published
2026-11-13
DOI
https://doi.org/10.1177/09544097261505151
Primary Topic
Railway Engineering and Dynamics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Impact loads from freight wagon wheels with two non-condemnable tread defects: Modelling, field verification, and proposals for regulatory change

A. S. Adadurov
1 links
Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit
Railway Engineering and Dynamics
article

Impact loads from freight wagon wheels with two non-condemnable tread defects: Modelling, field verification, and proposals for regulatory change

A. S. Adadurov
article en

Abstract

Wayside train monitoring systems based on measuring wheel–rail impact forces often register loads exceeding regulatory limits from wheels on which visual inspection finds only defects below the condemning size limits. This paper shows that such readings can be caused by the combined action of two or more non-condemnable tread defects. An impact interaction model built on A. Ya. Kogan’s theory, with the track represented as a beam on a Winkler elastic foundation, is adapted to several consecutively located defects using the time-delay theorem. Calculations are compared with data from the NEVA wayside monitoring system installed at Veimarn station of the Oktyabrskaya Railway (Russia). The medians of measured loads for wheels with double non-condemnable defects and for wheels with single condemnable defects are comparable in the examined groups of four and five wheels, differing by 9% with fully overlapping ranges. For wheelsets with inspection records, a response inversion is found, in which non-condemnable defects with sharp edges produce a larger signal in the 250–350 Hz diagnostic band than a large condemnable defect with a gently sloping entry, while the superposition of impact pulses from closely spaced defects can lead to a condemnable wheel being missed. The results agree with independent European studies favouring a force-based removal criterion over a geometric one. A closed-form classification of the interaction regimes of two defects is given through the flight length of the wheel, and the criterion is generalised to bogies of different design. For the 18-9855 bogie with a 25 t axle load, the inertial decoupling of the side frame reduces the effective impact mass from 926 to 725 kg, so that the track impact at the condemning flat depth is about 7% lower than for the 18–100 bogie despite the higher axle load, and the equivalent condemning depth is about 1.3 mm.

Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit
Petersburg State Transport University (RU)
Industry, innovation and infrastructure
Railway Engineering and Dynamics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon