Biomechanical effects of posterior attachment design on mandibular incisor intrusion with clear aligners: a three-dimensional finite element analysis
This study evaluated the initial biomechanical effects of different posterior attachment designs during mandibular incisor intrusion with clear aligners using three-dimensional finite element analysis. A mandibular half-arch finite element model was constructed from computed tomography data. Five models were evaluated: no attachment (NA), horizontal rectangular attachment (HRA), gingivally beveled horizontal rectangular attachment (GB-HRA), occlusally beveled horizontal rectangular attachment (OB-HRA), and modified dome-shaped attachment (MDA). Attachments were placed on the mandibular canines and premolars. A 0.2-mm intrusive activation was simulated through an interference fit between the mandibular central and lateral incisors and the corresponding internal surfaces of the clear aligner. Directional dental displacement, aligner displacement and Von Mises stress, attachment stress, contact pressure, aligner–attachment contact area, and periodontal ligament stress were evaluated. Posterior attachment design influenced the initial biomechanical responses of the mandibular teeth and clear aligner. The HRA model produced substantial incisal-edge displacement in the intrusive direction with relatively limited reactive extrusion in the canine–premolar region. The MDA model exhibited the greatest incisal-edge displacement in the intrusive direction, the lowest aligner displacement, the highest aligner–attachment contact ratio, and the lowest attachment stress. However, it also produced the highest aligner and periodontal ligament Von Mises stresses and pronounced reactive canine–premolar extrusion. The GB-HRA model exhibited the highest attachment stress and contact pressure. Posterior attachment designs produced distinct initial biomechanical responses during simulated mandibular incisor intrusion. The HRA model demonstrated a more favorable balance between anterior incisal-edge displacement in the intrusive direction and limited posterior extrusion, whereas the MDA model exhibited reduced aligner displacement and increased aligner–attachment contact accompanied by higher stress concentrations and reactive extrusion. These findings characterize initial mechanical behavior and should not be interpreted as direct evidence of clinical retention, stability, or treatment effectiveness.
Authors
- Merve Berika Kadıoğlu (ORCID: https://orcid.org/0000-0002-7005-6179)
- Meyra Durmaz (ORCID: https://orcid.org/0009-0001-8486-875X)
- Meliha Rübendiz
- Nursima Gökmen Çakır
Institutions
- Çankaya University (TR)
- Ankara University (TR)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1038/s41598-026-80954-8
- Primary Topic
- Orthodontics and Dentofacial Orthopedics
- Type
- article
- Field-Weighted Citation Impact
- 0.00