Comparative Assessment of 6/4, 8/6 and 10/8 Switched Reluctance Machines under Open-Circuit and Short-Circuit Phase Faults
Abstract Switched Reluctance Motors (SRMs) have become a prominent choice in several applications due to their simplicity, high efficiency, and absence of permanent magnets or windings on the rotor. Additionally, they have superior fault tolerance, which allows them to continue to operate in the presence of faults. However, they are susceptible to defects and possible malfunctions that might have significant consequences for the system, the most common being short-circuit and open-circuit faults. This paper compares a three-phase 6/4, a four-phase 8/6 and a five-phase 10/8 SRM in MATLAB/Simulink, using the same asymmetric half-bridge converter, hysteresis current controller (30 A reference, 48 V DC link) and commutation angles, under healthy operation, a single-phase short circuit and a single-phase open circuit. Torque ripple, phase current and flux linkage are used as indicators. In the simulations, all three machines were able to continue operating under both faults. The study revealed that the pole and phase configuration influences how strongly faults affect the machine, with the 10/8 SRM showing the most favorable behavior among the three configurations under the studied conditions.
Authors
- Sara Barbara (ORCID: https://orcid.org/0009-0007-7636-8847)
Institutions
- Université Moulay Ismail de Meknes (MA)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11706067/v1
- Primary Topic
- Electric Motor Design and Analysis
- Type
- preprint
Funders
- Centre National pour la Recherche Scientifique et Technique