Hybrid Rapid Tooling for Centrifugal Pump Impellers: Influence of Additive Mould Topography and Post-Processing on Wax Pattern Accuracy

This article proposes a hybrid concept for rapid tooling in investment casting for the impeller of the CH 100/32-15-1 sealed centrifugal pump, which overcomes the dimensional limitations of 3D printing and reduces tooling costs. The moulding elements of the discs are manufactured by turning, whilst the complex-shaped three-dimensional blades are produced using additive manufacturing methods. A comparison was carried out between eight configurations of polymer moulds (SLS using PA-12 and FDM using ABS with 0.2 and 0.4 mm nozzles, without post-processing, after mechanical polishing and smoothing with acetone vapour) and a reference industrial aluminium mould. The surface roughness of the working cavities was measured using a Form Talysurf Intra profilometer (12 traces per mould), whilst the geometry of the resulting wax patterns was checked using a Creaform HandyScan 700 Elite 3D scanner to analyse the hydraulic surfaces of the blades. The use of untreated PA-12 (Ra = 3.335 ± 0.358 µm) caused chipping of two out of five wax patterns during removal, whilst mechanical polishing reduced Ra to 0.157 ± 0.031 µm, surpassing the aluminium reference standard (0.247 ± 0.043 µm) in terms of roughness. The proportion of the blade area within the ±0.100 mm tolerance range was 86.1% for the aluminium mould and 12.4–53.9% for the polymer moulds (with the highest value for the polished PA-12), with a systematic positive deviation observed in all printed samples. Thus, polished SLS moulds made from PA-12 represent a cost-effective solution for prototyping and small-batch production of wax blade patterns, provided that warpage is taken into account.

Authors

Institutions

Publication Details

Journal
Applied Sciences
Published
2026-11-13
DOI
https://doi.org/10.3390/app162211243
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Hybrid Rapid Tooling for Centrifugal Pump Impellers: Influence of Additive Mould Topography and Post-Processing on Wax Pattern Accuracy

Ion Mălăel, Andrei Platon, Viorel Bostan, Andrei Petco et al.
2 links
Applied Sciences
Additive Manufacturing and 3D Printing Technologies
article

Hybrid Rapid Tooling for Centrifugal Pump Impellers: Influence of Additive Mould Topography and Post-Processing on Wax Pattern Accuracy

Ion Mălăel, Andrei Platon, Viorel Bostan, Andrei Petco, Dmitrii Croitor, Nadejda Proca, Vadim Zubac
article en

Abstract

This article proposes a hybrid concept for rapid tooling in investment casting for the impeller of the CH 100/32-15-1 sealed centrifugal pump, which overcomes the dimensional limitations of 3D printing and reduces tooling costs. The moulding elements of the discs are manufactured by turning, whilst the complex-shaped three-dimensional blades are produced using additive manufacturing methods. A comparison was carried out between eight configurations of polymer moulds (SLS using PA-12 and FDM using ABS with 0.2 and 0.4 mm nozzles, without post-processing, after mechanical polishing and smoothing with acetone vapour) and a reference industrial aluminium mould. The surface roughness of the working cavities was measured using a Form Talysurf Intra profilometer (12 traces per mould), whilst the geometry of the resulting wax patterns was checked using a Creaform HandyScan 700 Elite 3D scanner to analyse the hydraulic surfaces of the blades. The use of untreated PA-12 (Ra = 3.335 ± 0.358 µm) caused chipping of two out of five wax patterns during removal, whilst mechanical polishing reduced Ra to 0.157 ± 0.031 µm, surpassing the aluminium reference standard (0.247 ± 0.043 µm) in terms of roughness. The proportion of the blade area within the ±0.100 mm tolerance range was 86.1% for the aluminium mould and 12.4–53.9% for the polymer moulds (with the highest value for the polished PA-12), with a systematic positive deviation observed in all printed samples. Thus, polished SLS moulds made from PA-12 represent a cost-effective solution for prototyping and small-batch production of wax blade patterns, provided that warpage is taken into account.

Applied SciencesVol. 16(22)
Technical University of Moldova (MD), Romanian Research and Development Institute for Gas Turbines (RO)
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon