The Effect of Copper Addition to Secondary Aluminum Obtained from Aluminum Dross and Casting Temperature on Fluidity and Microstructural Properties
Abstract In this study, the effects of copper addition and casting temperature on the fluidity and microstructural properties of secondary aluminum recovered from dross waste generated during aluminum production were investigated. In this context, alloys containing different copper contents (0%, 1%, and 2.5%) were processed at casting temperatures of 700, 725, and 750°C, and the fluidity performances of the alloys were evaluated using the spiral mold method. The microstructural properties of the obtained samples were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), and microhardness measurements were performed. The results showed that copper addition and casting temperature jointly affected the fluidity behavior. While the highest fluidity lengths in the samples without copper addition and containing 1% Cu were measured as 17.6 and 17.0 cm, respectively, at 750°C, the highest value in the sample containing 2.5% Cu was determined as 15.7 cm at 725°C. Microstructural examinations revealed that, with copper addition, the morphology of the secondary phases transformed from needle-like and plate-like structures into a eutectic-dendritic network and coarser, band-like structures. The findings indicate that the casting performance of dross-derived secondary aluminum can be improved by controlling the alloy composition and process temperature.
Authors
- Selçuk Yeşiltepe (ORCID: https://orcid.org/0000-0002-0982-3439)
- İbrahim Umut Yurtsever
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11427843/v1
- Primary Topic
- Aluminum Alloy Microstructure Properties
- Type
- preprint