Effects of graded palatal edge extension on tooth movement during maxillary arch expansion with clear aligners: a three-dimensional finite element study

To evaluate how palatal trimline shape and graded edge extension affect the initial biomechanical response of clear aligners during maxillary arch expansion. A symmetric full-arch finite element model was constructed from maxillary imaging data. Five aligners shared a scalloped buccal margin and a nominal thickness of 0.75 mm. Their palatal margins were scalloped without extension (Z0), straight without extension (Z1), or straight with 1-, 2-, or 3-mm extensions (Z2–Z4). A 0.20-mm buccal movement was programmed for each premolar and molar to generate the target aligner geometry. Each aligner was then assembled on the unmoved dentition to produce initial elastic loading. Tooth displacement, the signed crown-root displacement ratios (R/C), posterior tooth inclination angles, periodontal ligament (PDL) stresses, and aligner–tooth contact characteristics were evaluated. Z0 and Z1 showed similar maximum dentition displacement and peak PDL von Mises stress. Within the straight-margin series, maximum displacement reached 87.8 μm in Z3 and 91.9 μm in Z4, while peak von Mises stress reached 0.0664 and 0.0730 MPa, respectively. The first premolar showed the strongest initial expansion response. Its buccal crown displacement increased with extension, whereas opposing root displacement remained nearly stable. Its R/C became less negative, although crown and root displacements remained in opposite directions and the inclination angle increased slightly. Cervical PDL loading increased, with palatal tensile and buccal compressive regions. Compared with the unextended margin, extended margins produced larger contact areas at the first premolar and first molar and higher peak aligner–dentition contact pressure, with the first-premolar pressure maximum shifting from the palatal middle third to the cervical third with the 3-mm extension. The central incisor showed greater relative root participation and a reduced tipping tendency with longer extensions. The first molar response remained small, with a largely stable R/C pattern. Palatal edge extension increased initial tooth displacement, most clearly in the first premolar, and altered the PDL stress distribution. These findings support further investigation of palatal margin length as a design variable, though clinical evaluation remains necessary to determine the optimal extension length and patient tolerance.

Authors

Institutions

Publication Details

Journal
BMC Oral Health
Published
2026-11-13
DOI
https://doi.org/10.1186/s12903-026-10403-5
Primary Topic
Orthodontics and Dentofacial Orthopedics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of graded palatal edge extension on tooth movement during maxillary arch expansion with clear aligners: a three-dimensional finite element study

闫伟军, Lan Yu, Jialin Liu, Yuqi Zu et al.
5 links
BMC Oral Health
Orthodontics and Dentofacial Orthopedics
article

Effects of graded palatal edge extension on tooth movement during maxillary arch expansion with clear aligners: a three-dimensional finite element study

闫伟军, Lan Yu, Jialin Liu, Yuqi Zu, Xiuxian Yang
article en

Abstract

To evaluate how palatal trimline shape and graded edge extension affect the initial biomechanical response of clear aligners during maxillary arch expansion. A symmetric full-arch finite element model was constructed from maxillary imaging data. Five aligners shared a scalloped buccal margin and a nominal thickness of 0.75 mm. Their palatal margins were scalloped without extension (Z0), straight without extension (Z1), or straight with 1-, 2-, or 3-mm extensions (Z2–Z4). A 0.20-mm buccal movement was programmed for each premolar and molar to generate the target aligner geometry. Each aligner was then assembled on the unmoved dentition to produce initial elastic loading. Tooth displacement, the signed crown-root displacement ratios (R/C), posterior tooth inclination angles, periodontal ligament (PDL) stresses, and aligner–tooth contact characteristics were evaluated. Z0 and Z1 showed similar maximum dentition displacement and peak PDL von Mises stress. Within the straight-margin series, maximum displacement reached 87.8 μm in Z3 and 91.9 μm in Z4, while peak von Mises stress reached 0.0664 and 0.0730 MPa, respectively. The first premolar showed the strongest initial expansion response. Its buccal crown displacement increased with extension, whereas opposing root displacement remained nearly stable. Its R/C became less negative, although crown and root displacements remained in opposite directions and the inclination angle increased slightly. Cervical PDL loading increased, with palatal tensile and buccal compressive regions. Compared with the unextended margin, extended margins produced larger contact areas at the first premolar and first molar and higher peak aligner–dentition contact pressure, with the first-premolar pressure maximum shifting from the palatal middle third to the cervical third with the 3-mm extension. The central incisor showed greater relative root participation and a reduced tipping tendency with longer extensions. The first molar response remained small, with a largely stable R/C pattern. Palatal edge extension increased initial tooth displacement, most clearly in the first premolar, and altered the PDL stress distribution. These findings support further investigation of palatal margin length as a design variable, though clinical evaluation remains necessary to determine the optimal extension length and patient tolerance.

BMC Oral Health
Harbin Medical University (CN), Fourth Affiliated Hospital of Harbin Medical University (CN), First Affiliated Hospital of Harbin Medical University (CN)
Good health and well-being
Orthodontics and Dentofacial Orthopedics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon