Tailoring micro-galvanic corrosion in ZK60 magnesium alloy via kinetically suppressed phase transformation during directional solidification

ZK60 magnesium alloy, with low density and high specific strength, has great potential for lightweight structural applications; however, its engineering application is limited by severe micro-galvanic corrosion. Previous studies have shown that the degradation behavior of magnesium alloys is strongly influenced by the characteristics and distribution of second phases. In this study, directional solidification (DS) was applied to regulate the microstructure of ZK60 alloy, and the effects of different withdrawal rates (10–200 µm/s) on dendrite evolution, second-phase transformation, and corrosion behavior were systematically investigated. Increasing the withdrawal rate reduced the primary dendrite arm spacing (λ 1 ) from 134.8 µm to 33.8 µm and decreased the characteristic second-phase size (D 70 ) from 12.5 µm 2 to 5.6 µm 2 . Rapid DS suppressed the eutectoid decomposition of metastable Mg 7 Zn 3 , preventing its transformation into the more cathodic MgZn phase. Consequently, coarse continuous MgZn networks were replaced by fine and uniformly distributed Mg 7 Zn 3 nanorods, reducing the micro-galvanic effect between the second phase and Mg matrix. Electrochemical measurements and immersion tests confirmed that this microstructural regulation promoted the formation of a compact Mg(OH) 2 corrosion film and improved corrosion resistance. Furthermore, a composite microstructural parameter Q (Q = λ 1 × D 70 ) was proposed, and a linear empirical model (R 2 = 0.99) was established to predict the corrosion rate. This study reveals the role of rapid directional solidification in stabilizing metastable phases and mitigating micro-galvanic corrosion, providing a potential strategy for developing corrosion-resistant magnesium alloys.

Authors

Institutions

Publication Details

Journal
Journal of Magnesium and Alloys
Published
2026-11-13
DOI
https://doi.org/10.1016/j.jma.2026.102395
Primary Topic
Magnesium Alloys: Properties and Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Tailoring micro-galvanic corrosion in ZK60 magnesium alloy via kinetically suppressed phase transformation during directional solidification

Nie Zhao, Fugang Qi, Yilong Dai, Baoyu Sun et al.
1 links
Journal of Magnesium and Alloys
Magnesium Alloys: Properties and Applications
article

Tailoring micro-galvanic corrosion in ZK60 magnesium alloy via kinetically suppressed phase transformation during directional solidification

Nie Zhao, Fugang Qi, Yilong Dai, Baoyu Sun, Songsong Hu, Chao Zhang, Xuhui Liu
article en

Abstract

ZK60 magnesium alloy, with low density and high specific strength, has great potential for lightweight structural applications; however, its engineering application is limited by severe micro-galvanic corrosion. Previous studies have shown that the degradation behavior of magnesium alloys is strongly influenced by the characteristics and distribution of second phases. In this study, directional solidification (DS) was applied to regulate the microstructure of ZK60 alloy, and the effects of different withdrawal rates (10–200 µm/s) on dendrite evolution, second-phase transformation, and corrosion behavior were systematically investigated. Increasing the withdrawal rate reduced the primary dendrite arm spacing (λ 1 ) from 134.8 µm to 33.8 µm and decreased the characteristic second-phase size (D 70 ) from 12.5 µm 2 to 5.6 µm 2 . Rapid DS suppressed the eutectoid decomposition of metastable Mg 7 Zn 3 , preventing its transformation into the more cathodic MgZn phase. Consequently, coarse continuous MgZn networks were replaced by fine and uniformly distributed Mg 7 Zn 3 nanorods, reducing the micro-galvanic effect between the second phase and Mg matrix. Electrochemical measurements and immersion tests confirmed that this microstructural regulation promoted the formation of a compact Mg(OH) 2 corrosion film and improved corrosion resistance. Furthermore, a composite microstructural parameter Q (Q = λ 1 × D 70 ) was proposed, and a linear empirical model (R 2 = 0.99) was established to predict the corrosion rate. This study reveals the role of rapid directional solidification in stabilizing metastable phases and mitigating micro-galvanic corrosion, providing a potential strategy for developing corrosion-resistant magnesium alloys.

Journal of Magnesium and AlloysVol. 26
Xiangtan University (CN)
National Natural Science Foundation of China
Magnesium Alloys: Properties and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon