Effects of Hyperthermal Atomic Oxygen and Surface Topology on Germanium Coatings Used to Reduce Drag in Low Earth Orbit

Low-altitude orbit spacecraft require materials that resist hyperthermal atomic oxygen (AO) erosion and maintain low-drag gas-surface interactions. In this work, we examine thin germanium (Ge) coatings as a non-native oxide-forming surface that generate a protective oxide layer in situ under AO exposure while preserving favorable scattering behavior. Ge-coated silicon samples are exposed to a hyperthermal O/O2 beam representative of low Earth orbit conditions and are analyzed using mass-loss measurements, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), molecular-beam scattering experiments, and direct simulation Monte Carlo (DSMC) modeling. In particular, we use DSMC to examine the hypothesis that AO scattering and surface drag for shallow incidence impingement can be predicted accurately based on the AFMmeasured shape and the scattering properties of an unexposed flat Ge surface. Experiments show that Ge films show negligible mass loss at an AO fluence of 8.15 × 10 20 ± 5.28 × 10 19 O-atoms cm -2 , corresponding to an erosion yield below 0.03% of Kapton H, and exhibit a small change in roughness after exposure. XPS measurements show strong oxidation of the near-surface region, indicating formation of a GeO2-rich layer. Scattering experiments reveal quasi-specular, oxide-like angular distributions comparable to established reference materials, and DSMC results indicate only minor drag changes at the tested exposure level because AO-induced topographic changes were minimal. Notably, the microscopic distribution of slopes of the degraded surface, rather than the root mean square roughness, determines the scattering distribution and drag. Together, these results show that Ge coatings can couple AO resistance with favorable scattering behavior, making them a promising candidate for low-drag spacecraft surfaces in low-altitude orbits. The study also highlights the value of combining surface characterization, beam scattering, and roughnessresolved DSMC to link AO-driven surface evolution with orbital drag performance.

Authors

Institutions

Publication Details

Journal
ChemRxiv
Published
2026-11-12
DOI
https://doi.org/10.26434/chemrxiv.15012134/v1
Primary Topic
Gas Dynamics and Kinetic Theory
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Effects of Hyperthermal Atomic Oxygen and Surface Topology on Germanium Coatings Used to Reduce Drag in Low Earth Orbit

Akhilesh S. Tiwari, Muhammad Fiaz, Thomas C. Underwood, Charles Buddie Mullins et al.
ChemRxiv
Gas Dynamics and Kinetic Theory
preprint

Effects of Hyperthermal Atomic Oxygen and Surface Topology on Germanium Coatings Used to Reduce Drag in Low Earth Orbit

Akhilesh S. Tiwari, Muhammad Fiaz, Thomas C. Underwood, Charles Buddie Mullins, Anton Burtsev, David B. Goldstein
preprint en

Abstract

Low-altitude orbit spacecraft require materials that resist hyperthermal atomic oxygen (AO) erosion and maintain low-drag gas-surface interactions. In this work, we examine thin germanium (Ge) coatings as a non-native oxide-forming surface that generate a protective oxide layer in situ under AO exposure while preserving favorable scattering behavior. Ge-coated silicon samples are exposed to a hyperthermal O/O2 beam representative of low Earth orbit conditions and are analyzed using mass-loss measurements, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), molecular-beam scattering experiments, and direct simulation Monte Carlo (DSMC) modeling. In particular, we use DSMC to examine the hypothesis that AO scattering and surface drag for shallow incidence impingement can be predicted accurately based on the AFMmeasured shape and the scattering properties of an unexposed flat Ge surface. Experiments show that Ge films show negligible mass loss at an AO fluence of 8.15 × 10 20 ± 5.28 × 10 19 O-atoms cm -2 , corresponding to an erosion yield below 0.03% of Kapton H, and exhibit a small change in roughness after exposure. XPS measurements show strong oxidation of the near-surface region, indicating formation of a GeO2-rich layer. Scattering experiments reveal quasi-specular, oxide-like angular distributions comparable to established reference materials, and DSMC results indicate only minor drag changes at the tested exposure level because AO-induced topographic changes were minimal. Notably, the microscopic distribution of slopes of the degraded surface, rather than the root mean square roughness, determines the scattering distribution and drag. Together, these results show that Ge coatings can couple AO resistance with favorable scattering behavior, making them a promising candidate for low-drag spacecraft surfaces in low-altitude orbits. The study also highlights the value of combining surface characterization, beam scattering, and roughnessresolved DSMC to link AO-driven surface evolution with orbital drag performance.

ChemRxiv
Texas Materials Institute (US), The University of Texas at Austin (US)
Gas Dynamics and Kinetic Theory
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon