Multiscale Thermal Transport in AlPO-18 for Heat-Transformation Applications

Abstract A multiscale analysis of framework dynamics, negative thermal expansion, and heat transport is presented for AlPO-18, with explicit distinction between crystallographic cell conventions and transport operators. The calcined conventional C2/c cell contains Al₂₄P₂₄O₉₆, 144 atoms, and has a volume of 3241.81 ų, whereas the corresponding 72-atom primitive cell has a volume of 1620.90 ų. The calculated elastic tensor is positive definite, with stiffness eigenvalues ranging from 13.9 to 222 GPa. The Reuss bulk, shear, and Young moduli are 73.56, 19.34, and 53.35 GPa, respectively. Variable-temperature diffraction reveals a volume contraction of 0.91% between 105 and 455 K. The volumetric thermal-expansion coefficient remains negative throughout this interval, changing from − 30.75 × 10⁻⁶ K⁻¹ at 105 K to − 22.41 × 10⁻⁶ K⁻¹ at 455 K, with a value of − 26.18 × 10⁻⁶ K⁻¹ at 298 K. No thermal-expansion crossover is observed. Analysis of the local T···T distances and the eight-membered-ring span shows that the contraction is governed primarily by transverse Al–O–P hinging and cooperative tetrahedral rotations rather than uniform bond shortening. A 216-branch harmonic spectrum, Raman comparison, charge-density redistribution, and heat-capacity-weighted mode analysis associate this structural flexibility with low-frequency collective framework vibrations. The transport analysis distinguishes three physically different conductivity baselines: 1.150 W m⁻¹ K⁻¹ for the periodic Wigner total, 0.773 W m⁻¹ K⁻¹ for the reservoir Monte Carlo population target, and 0.370 W m⁻¹ K⁻¹ for the boundary-limited platelet response. These values correspond to different operators, geometries, and channel definitions and therefore do not represent competing estimates of a single bulk conductivity. A gray two-stream benchmark gives a statistical convergence slope of − 0.53 and approaches the diffusive limit within 2% for L/Λ ≥ 98. Boundary calculations and AlPO-18/PVOH coating transients further demonstrate how thickness, surface specularity, and coupled heat and mass transfer modify the intrinsic framework response. The study establishes a quantitatively consistent connection between cell normalization, macroscopic contraction, framework vibrations, transport channels, and application-scale thermal behaviour in AlPO-18.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-13
DOI
https://doi.org/10.21203/rs.3.rs-10956470/v1
Primary Topic
Thermal Expansion and Ionic Conductivity
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Multiscale Thermal Transport in AlPO-18 for Heat-Transformation Applications

Zhou Chen, Rami Mrad, Mahdi Mourad LAICHAOUI, . Ayesha
Research Square
Thermal Expansion and Ionic Conductivity
preprint

Multiscale Thermal Transport in AlPO-18 for Heat-Transformation Applications

Zhou Chen, Rami Mrad, Mahdi Mourad LAICHAOUI, . Ayesha
preprint en

Abstract

Abstract A multiscale analysis of framework dynamics, negative thermal expansion, and heat transport is presented for AlPO-18, with explicit distinction between crystallographic cell conventions and transport operators. The calcined conventional C2/c cell contains Al₂₄P₂₄O₉₆, 144 atoms, and has a volume of 3241.81 ų, whereas the corresponding 72-atom primitive cell has a volume of 1620.90 ų. The calculated elastic tensor is positive definite, with stiffness eigenvalues ranging from 13.9 to 222 GPa. The Reuss bulk, shear, and Young moduli are 73.56, 19.34, and 53.35 GPa, respectively. Variable-temperature diffraction reveals a volume contraction of 0.91% between 105 and 455 K. The volumetric thermal-expansion coefficient remains negative throughout this interval, changing from − 30.75 × 10⁻⁶ K⁻¹ at 105 K to − 22.41 × 10⁻⁶ K⁻¹ at 455 K, with a value of − 26.18 × 10⁻⁶ K⁻¹ at 298 K. No thermal-expansion crossover is observed. Analysis of the local T···T distances and the eight-membered-ring span shows that the contraction is governed primarily by transverse Al–O–P hinging and cooperative tetrahedral rotations rather than uniform bond shortening. A 216-branch harmonic spectrum, Raman comparison, charge-density redistribution, and heat-capacity-weighted mode analysis associate this structural flexibility with low-frequency collective framework vibrations. The transport analysis distinguishes three physically different conductivity baselines: 1.150 W m⁻¹ K⁻¹ for the periodic Wigner total, 0.773 W m⁻¹ K⁻¹ for the reservoir Monte Carlo population target, and 0.370 W m⁻¹ K⁻¹ for the boundary-limited platelet response. These values correspond to different operators, geometries, and channel definitions and therefore do not represent competing estimates of a single bulk conductivity. A gray two-stream benchmark gives a statistical convergence slope of − 0.53 and approaches the diffusive limit within 2% for L/Λ ≥ 98. Boundary calculations and AlPO-18/PVOH coating transients further demonstrate how thickness, surface specularity, and coupled heat and mass transfer modify the intrinsic framework response. The study establishes a quantitatively consistent connection between cell normalization, macroscopic contraction, framework vibrations, transport channels, and application-scale thermal behaviour in AlPO-18.

Research Square
University of Science and Technology of China (CN), Nanjing University of Aeronautics and Astronautics (CN)
Thermal Expansion and Ionic Conductivity
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon