Fresh, Mechanical, and Durability Performance of Ambient-Cured Fly Ash-Ground Granulated Blast Furnace Slag Geopolymer Concrete: Effect of Mix Design Parameters

Geopolymer concrete produced from fly ash and ground granulated blast furnace slag (GGBFS) has been proposed as a lower-carbon alternative to Portland cement concrete, and blending the two precursors allows for curing at ambient temperature. However, the combined influence of the precursor proportion and activator formulation on the durability of such concretes is not well documented, because mechanical and durability properties have mostly been studied separately. The objective of this study was therefore to evaluate, within a single experimental programme, how the fly ash-to-slag proportion and three combined activator formulations affect the fresh, mechanical and durability properties of ambient-cured hybrid geopolymer concrete. This study examines the influence of the fly ash-to-slag proportion and of three combined activator formulations (nominal Si/Al of 2.0, 2.5 and 3.0, each paired with an SS/SH ratio of 1.5, 2.0 and 2.5, respectively) on the fresh-state, mechanical, and durability characteristics of ambient-cured hybrid geopolymer concrete. Twelve mixture compositions were systematically designed at a constant binder content (500 kg/m3) and NaOH concentration (10 M); the alkaline solution-to-binder ratio varied from 0.33 to 0.39 with the activator formulation. Because Si/Al and SS/SH were varied together, their individual effects could not be separated. Progressive augmentation of the GGBFS proportion from 20% to 50% increased strength and improved the measured durability indicators, while reducing slump and setting time. The best-performing mixture in most tests (M11: 50% GGBFS, nominal Si/Al = 2.5, SS/SH = 2.0) attained a 28-day compressive strength of 60.3 MPa, water absorption of 3.8%, ultrasonic pulse velocity of 4.79 km/s and the lowest freeze–thaw strength loss (4.8%); the highest formulation (M12) was marginally better in the 90-day sulfate test (1.9% versus 2.0% strength loss). Conversely, the highest activator formulation (Si/Al = 3.0, SS/SH = 2.5) slightly reduced strength and increased shrinkage and freeze–thaw strength loss relative to the intermediate one; a viscosity-related limitation of ion mobility is a possible but unverified explanation. These outcomes show that precursor blending and activator formulation strongly affect the laboratory performance of ambient-cured fly ash–GGBFS geopolymer concrete; structural suitability, field durability and environmental benefit were not assessed.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-13
DOI
https://doi.org/10.3390/ma19224831
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Fresh, Mechanical, and Durability Performance of Ambient-Cured Fly Ash-Ground Granulated Blast Furnace Slag Geopolymer Concrete: Effect of Mix Design Parameters

Ali Mardani, Yahya Kaya, Daniel Hatungimana, Tuğçe KAYA
Materials
Concrete and Cement Materials Research
article

Fresh, Mechanical, and Durability Performance of Ambient-Cured Fly Ash-Ground Granulated Blast Furnace Slag Geopolymer Concrete: Effect of Mix Design Parameters

Ali Mardani, Yahya Kaya, Daniel Hatungimana, Tuğçe KAYA
article en

Abstract

Geopolymer concrete produced from fly ash and ground granulated blast furnace slag (GGBFS) has been proposed as a lower-carbon alternative to Portland cement concrete, and blending the two precursors allows for curing at ambient temperature. However, the combined influence of the precursor proportion and activator formulation on the durability of such concretes is not well documented, because mechanical and durability properties have mostly been studied separately. The objective of this study was therefore to evaluate, within a single experimental programme, how the fly ash-to-slag proportion and three combined activator formulations affect the fresh, mechanical and durability properties of ambient-cured hybrid geopolymer concrete. This study examines the influence of the fly ash-to-slag proportion and of three combined activator formulations (nominal Si/Al of 2.0, 2.5 and 3.0, each paired with an SS/SH ratio of 1.5, 2.0 and 2.5, respectively) on the fresh-state, mechanical, and durability characteristics of ambient-cured hybrid geopolymer concrete. Twelve mixture compositions were systematically designed at a constant binder content (500 kg/m3) and NaOH concentration (10 M); the alkaline solution-to-binder ratio varied from 0.33 to 0.39 with the activator formulation. Because Si/Al and SS/SH were varied together, their individual effects could not be separated. Progressive augmentation of the GGBFS proportion from 20% to 50% increased strength and improved the measured durability indicators, while reducing slump and setting time. The best-performing mixture in most tests (M11: 50% GGBFS, nominal Si/Al = 2.5, SS/SH = 2.0) attained a 28-day compressive strength of 60.3 MPa, water absorption of 3.8%, ultrasonic pulse velocity of 4.79 km/s and the lowest freeze–thaw strength loss (4.8%); the highest formulation (M12) was marginally better in the 90-day sulfate test (1.9% versus 2.0% strength loss). Conversely, the highest activator formulation (Si/Al = 3.0, SS/SH = 2.5) slightly reduced strength and increased shrinkage and freeze–thaw strength loss relative to the intermediate one; a viscosity-related limitation of ion mobility is a possible but unverified explanation. These outcomes show that precursor blending and activator formulation strongly affect the laboratory performance of ambient-cured fly ash–GGBFS geopolymer concrete; structural suitability, field durability and environmental benefit were not assessed.

MaterialsVol. 19(22)
Bursa Uludağ Üni̇versi̇tesi̇ (TR), Avrasya University (TR), Université du Burundi (BI)
Bursa Uludağ Üniversitesi
Responsible consumption and production, Industry, innovation and infrastructure
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon