Experimental Investigation into the Mechanical and Optical Properties of Transparent Concrete using Plastic Optical Fibers

Sustainable construction increasingly demands innovative materials that reduce building energy consumption without sacrificing functional structural performance. Light-transmitting concrete (LTC), a composite material embedding optical fibers into a fine-grained concrete matrix, offers significant potential for indoor daylighting and architectural applications. However, a critical trade-off exists between optical transparency and mechanical strength, and widespread adoption is hindered by a lack of clarity regarding whether reduced compressive strength meets non-load-bearing structural standards. To address this gap, this study systematically investigates the compressive strength and light transmission efficiency of plastic optical fiber (POF) grids embedded in a fine-aggregate mortar matrix. Three grid arrangements were evaluated: 13x13 (5.00% fiber density), 15x15 (5.72%), and 18x18 (7.00%). Experimental testing using a luxmeter and light-dependent resistor (LDR) setups demonstrated that optical transmission scales directly with fiber density, peaking at 70.30% for the 18x18 grid. Conversely, compressive strength tests at 28 days revealed an inverse relationship with fiber volume: while the 13x13 grid retained a high compressive strength of 9.5 MPa (exceeding the 9.3 MPa control specimen), strength dropped to 7.1 MPa for 15x15 and 5.7 MPa for 18x18. Evaluating these metrics against civil engineering standards reveals that even the lowest-strength 18x18 configuration (5.7 MPa) safely exceeds the baseline compressive strength required for non-load-bearing masonry units and partition walls (3.5–5.0 MPa, e.g., ASTM C90/C129), maximizing daylighting performance. Meanwhile, the 13x13 configuration provides a viable solution for low-stress semi-load-bearing structural applications. These findings establish clear application-specific criteria for LTC, demonstrating its practical viability in energy-efficient green architecture.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-13
DOI
https://doi.org/10.5281/zenodo.24208267
Primary Topic
Innovative concrete reinforcement materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Experimental Investigation into the Mechanical and Optical Properties of Transparent Concrete using Plastic Optical Fibers

Sir Syed University of Engineering and Technology
Zenodo (CERN European Organization for Nuclear Research)
Innovative concrete reinforcement materials
article

Experimental Investigation into the Mechanical and Optical Properties of Transparent Concrete using Plastic Optical Fibers

Sir Syed University of Engineering and Technology
article en

Abstract

Sustainable construction increasingly demands innovative materials that reduce building energy consumption without sacrificing functional structural performance. Light-transmitting concrete (LTC), a composite material embedding optical fibers into a fine-grained concrete matrix, offers significant potential for indoor daylighting and architectural applications. However, a critical trade-off exists between optical transparency and mechanical strength, and widespread adoption is hindered by a lack of clarity regarding whether reduced compressive strength meets non-load-bearing structural standards. To address this gap, this study systematically investigates the compressive strength and light transmission efficiency of plastic optical fiber (POF) grids embedded in a fine-aggregate mortar matrix. Three grid arrangements were evaluated: 13x13 (5.00% fiber density), 15x15 (5.72%), and 18x18 (7.00%). Experimental testing using a luxmeter and light-dependent resistor (LDR) setups demonstrated that optical transmission scales directly with fiber density, peaking at 70.30% for the 18x18 grid. Conversely, compressive strength tests at 28 days revealed an inverse relationship with fiber volume: while the 13x13 grid retained a high compressive strength of 9.5 MPa (exceeding the 9.3 MPa control specimen), strength dropped to 7.1 MPa for 15x15 and 5.7 MPa for 18x18. Evaluating these metrics against civil engineering standards reveals that even the lowest-strength 18x18 configuration (5.7 MPa) safely exceeds the baseline compressive strength required for non-load-bearing masonry units and partition walls (3.5–5.0 MPa, e.g., ASTM C90/C129), maximizing daylighting performance. Meanwhile, the 13x13 configuration provides a viable solution for low-stress semi-load-bearing structural applications. These findings establish clear application-specific criteria for LTC, demonstrating its practical viability in energy-efficient green architecture.

Zenodo (CERN European Organization for Nuclear Research)
Industry, innovation and infrastructure
Innovative concrete reinforcement materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon