Procedure optimization and performance study of GTAW-WAAM ER2594 duplex stainless steel based on response surface methodology
Purpose The purpose of this study is to optimize gas tungsten arc welding (GTAW)-based wire arc additive manufacturing (WAAM) for fabricating ER2594 duplex stainless steel (DSS) thin-walled components and to correlate the resulting microstructures and mechanical properties with the optimized processing conditions. Design/methodology/approach Response surface methodology (RSM) with a three-factor, five-level experimental design was used to quantify the effects of welding current, welding speed and wire-feed speed on bead geometry (bead width and shape factor) and to develop a predictive model. Thin-walled components were then fabricated under the optimized parameters, followed by EBSD characterization of phase constitution and texture and room-temperature tensile testing. Findings Under the optimized parameters, thin-walled components were deposited uniformly with a machinable fraction > 90%. EBSD confirmed a ferrite–austenite duplex structure (43.6% ferrite and 56.4% austenite) with a pronounced < 001>//BD ferrite fiber texture and a more dispersed austenite texture. The tensile properties averaged 596.2 MPa in yield strength, 732.9 MPa in ultimate tensile strength and 39.3% in total elongation, indicating a favorable strength–ductility balance. Originality/value This work addresses the need for process optimization in GTAW-WAAM of ER2594 DSS, whose thin-wall formability and duplex phase balance are highly sensitive to heat input and thermal cycling; provides an RSM-based route to optimize GTAW-WAAM of ER2594 DSS thin-walled components; and establishes a processing–geometry–microstructure–property link under optimized processing, supporting reliable mechanical performance and microstructural tailoring for high-performance ER2594 DSS thin-walled WAAM components.
Authors
- Lisong Zhu (ORCID: https://orcid.org/0000-0003-4650-2981)
- Jian Han (ORCID: https://orcid.org/0000-0002-5011-3439)
- Xin Zhang (ORCID: https://orcid.org/0000-0001-9318-8839)
- Lisong Zhou
- TIAN Jiale (ORCID: https://orcid.org/0009-0001-6349-0057)
- Sijie Zhang (ORCID: https://orcid.org/0009-0007-3882-061X)
- Zhengyi Jiang
- Qian Wang
- Yinbao Tian
Institutions
- Tianjin University of Technology (CN)
- University of Wollongong (AU)
Publication Details
- Journal
- Rapid Prototyping Journal
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1108/rpj-04-2026-0244
- Primary Topic
- Additive Manufacturing Materials and Processes
- Type
- article
- Field-Weighted Citation Impact
- 0.00