Fluorinated MPA-BT-CA self assembled monolayers for perovskite solar cells balancing interfacial passivation and charge transport investigated by DFT and SCAPS-1D simulation

Fluorinated (D-A)-type self-assembled monolayers (SAMs) appear to be a promising structure for optimising the stability of hole transport layers (HTLs) in photovoltaic devices. In this article, we evaluate, using quantum calculations (DFT/TD-DFT) and numerical simulation (SCAPS-1D), the impact of fluorination on the electronic, optoelectronic, non-linear optical and thermodynamic properties of the MPA-BT-CA molecule (3-(7-(4-(bis(4-methoxyphenyl)amino)phenyl)benzo[c] [1, 2, 5]thiadiazol-4-yl) -2-cyanoacrylic acid, which is used as an HTL. The DFT results show that fluorination does not have a significant impact on the vibrational modes of the MPA-BT-CA molecule; a trade-off between interfacial passivation and charge transport is observed. Difluorination (2FMPA-BT-CA) results in a decrease in the energy of the lowest unoccupied molecular orbital (LUMO) (from − 3.17 to − 3.34 eV) and that of the highest occupied molecular orbital (HOMO) (from − 5.24 to − 5.36 eV). It increases the molecular reorganisation energy, thereby limiting its intrinsic hole mobility to \(\:{4.10}^{-3}\:{cm}^{2}{V}^{-1}{S}^{-1}.\) It also maximises the non-linear optical response with an 8.38% increase in hyperpolarizability \(\:\left({\beta\:}_{mol}\right)\) and structural stability. Although a significant decrease in hole transport parameters is observed with increasing fluorine content, the 2FMPA-BT-CA molecule exhibits a very high effective state density \(\:\:{N}_{V}\) ( \(\:62.02\times\:{10}^{20}{\:cm}^{-3})\) and superior chemical reactivity indices; this suggests a capacity for passivating interfacial defects. When integrated into a MA 0.5 FA 0.5 PbI 3 based perovskite solar cell via SCAPS-1D, a power conversion efficiency (PCE) of 20.25% is observed. In contrast, FMPA-BT-CA offers a better compromise in terms of optoelectronic properties, with a refractive index closer to that of perovskite, UV-visible absorption and dipole moment.

Authors

Institutions

Publication Details

Journal
Discover Applied Sciences
Published
2026-11-13
DOI
https://doi.org/10.1007/s42452-026-09790-9
Primary Topic
Perovskite Materials and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Fluorinated MPA-BT-CA self assembled monolayers for perovskite solar cells balancing interfacial passivation and charge transport investigated by DFT and SCAPS-1D simulation

Ariel Teyou Ngoupo, L. Fomekong Tsague, J.M.B. Ndjaka, N. C. Tazanou Banka et al.
4 links
Discover Applied Sciences
Perovskite Materials and Applications
article

Fluorinated MPA-BT-CA self assembled monolayers for perovskite solar cells balancing interfacial passivation and charge transport investigated by DFT and SCAPS-1D simulation

Ariel Teyou Ngoupo, L. Fomekong Tsague, J.M.B. Ndjaka, N. C. Tazanou Banka, R. Jacques Eone II, M. T. Ottou Abe, P. G. D. Kond Ngue
article en

Abstract

Fluorinated (D-A)-type self-assembled monolayers (SAMs) appear to be a promising structure for optimising the stability of hole transport layers (HTLs) in photovoltaic devices. In this article, we evaluate, using quantum calculations (DFT/TD-DFT) and numerical simulation (SCAPS-1D), the impact of fluorination on the electronic, optoelectronic, non-linear optical and thermodynamic properties of the MPA-BT-CA molecule (3-(7-(4-(bis(4-methoxyphenyl)amino)phenyl)benzo[c] [1, 2, 5]thiadiazol-4-yl) -2-cyanoacrylic acid, which is used as an HTL. The DFT results show that fluorination does not have a significant impact on the vibrational modes of the MPA-BT-CA molecule; a trade-off between interfacial passivation and charge transport is observed. Difluorination (2FMPA-BT-CA) results in a decrease in the energy of the lowest unoccupied molecular orbital (LUMO) (from − 3.17 to − 3.34 eV) and that of the highest occupied molecular orbital (HOMO) (from − 5.24 to − 5.36 eV). It increases the molecular reorganisation energy, thereby limiting its intrinsic hole mobility to \(\:{4.10}^{-3}\:{cm}^{2}{V}^{-1}{S}^{-1}.\) It also maximises the non-linear optical response with an 8.38% increase in hyperpolarizability \(\:\left({\beta\:}_{mol}\right)\) and structural stability. Although a significant decrease in hole transport parameters is observed with increasing fluorine content, the 2FMPA-BT-CA molecule exhibits a very high effective state density \(\:\:{N}_{V}\) ( \(\:62.02\times\:{10}^{20}{\:cm}^{-3})\) and superior chemical reactivity indices; this suggests a capacity for passivating interfacial defects. When integrated into a MA 0.5 FA 0.5 PbI 3 based perovskite solar cell via SCAPS-1D, a power conversion efficiency (PCE) of 20.25% is observed. In contrast, FMPA-BT-CA offers a better compromise in terms of optoelectronic properties, with a refractive index closer to that of perovskite, UV-visible absorption and dipole moment.

Discover Applied Sciences
Université de Yaoundé I (CM), Arts et Métiers (FR)
Affordable and clean energy
Perovskite Materials and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon