Engineering properties, durability, microstructural, and sustainability characteristics of concrete made with LECA aggregate as an alternative to conventional coarse aggregate

The purpose of this research is to examine M25 grade concrete which incorporates unsoaked Light Expanded Clay Aggregate (LECA) as a substitute at 0% – 50% levels. Performance of freshly mixed concrete was evaluated based on slump test. Hardened concrete was tested for density, compressive strength, split tensile strength and flexural strength at 28 days. The mixes were also assessed for durability through acid and sulphate mass loss, water absorption and Rapid Chloride Penetration Testing (RCPT). Micro-structural characteristics were evaluated using Scanning Electron Microscopy-Energy Dispersive X-ray (SEM–EDX) analysis and sustainability was evaluated using both embodied energy and carbon (CO₂) emissions. The results also showed that a strong linear relationship exists between compressive strengths and densities (R 2 ≈ 0.98). Based on the experimental results, LECA replacement levels of 20–25% gave the most favourable trade-off between compressive strength retention and concrete density reduction, giving compressive strengths of 17–19 MPa (compared to 31.45 MPa for the control mix) while reducing concrete density by 15–20%. In terms of durability, although indications of increased water absorption, chloride penetration ability and mass loss were noted as the LECA content increased these levels exhibited acceptable levels of performance as per the American Concrete Institute (ACI) 213R-14. SEM–EDX analysis showed that the interfacial transition zone became more refined. There was less accumulation of calcium hydroxide, which helped create stronger mechanical bonding between the aggregate and the paste. The use of LECA increases the embodied energy of concrete but reduces its density, thereby lowering the dead load on the structure and may contribute to long-term sustainability benefits such as reduced operational and structural demand.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-13
DOI
https://doi.org/10.1038/s41598-026-71504-3
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Engineering properties, durability, microstructural, and sustainability characteristics of concrete made with LECA aggregate as an alternative to conventional coarse aggregate

N. Anand, Soorya M. Nair, Diana Andrushia, Alwyn Varghese
1 links
Scientific Reports
Concrete and Cement Materials Research
article

Engineering properties, durability, microstructural, and sustainability characteristics of concrete made with LECA aggregate as an alternative to conventional coarse aggregate

N. Anand, Soorya M. Nair, Diana Andrushia, Alwyn Varghese
article en

Abstract

The purpose of this research is to examine M25 grade concrete which incorporates unsoaked Light Expanded Clay Aggregate (LECA) as a substitute at 0% – 50% levels. Performance of freshly mixed concrete was evaluated based on slump test. Hardened concrete was tested for density, compressive strength, split tensile strength and flexural strength at 28 days. The mixes were also assessed for durability through acid and sulphate mass loss, water absorption and Rapid Chloride Penetration Testing (RCPT). Micro-structural characteristics were evaluated using Scanning Electron Microscopy-Energy Dispersive X-ray (SEM–EDX) analysis and sustainability was evaluated using both embodied energy and carbon (CO₂) emissions. The results also showed that a strong linear relationship exists between compressive strengths and densities (R 2 ≈ 0.98). Based on the experimental results, LECA replacement levels of 20–25% gave the most favourable trade-off between compressive strength retention and concrete density reduction, giving compressive strengths of 17–19 MPa (compared to 31.45 MPa for the control mix) while reducing concrete density by 15–20%. In terms of durability, although indications of increased water absorption, chloride penetration ability and mass loss were noted as the LECA content increased these levels exhibited acceptable levels of performance as per the American Concrete Institute (ACI) 213R-14. SEM–EDX analysis showed that the interfacial transition zone became more refined. There was less accumulation of calcium hydroxide, which helped create stronger mechanical bonding between the aggregate and the paste. The use of LECA increases the embodied energy of concrete but reduces its density, thereby lowering the dead load on the structure and may contribute to long-term sustainability benefits such as reduced operational and structural demand.

Scientific Reports
Karunya University (IN)
Responsible consumption and production, Sustainable cities and communities, Industry, innovation and infrastructure
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon