Design and characteristics improvement of GaN/Ga₂O₃ SACM-APDs featuring a p-type GaN multiplication layer for solar-blind single-photon detection

In this paper, a separate absorption, charge, and multiplication avalanche photodiode (SACM-APD) based on a GaN/Ga₂O₃ heterostructure is designed and optimized for high-performance ultraviolet single-photon detection. First, we evaluate a conventional SACM architecture using an n − -type Gallium nitride (GaN) multiplication layer and a n + -type gallium oxide (Ga₂O₃) charge layer and an n − -type Ga₂O₃ absorption layer as a baseline. To improve carrier-multiplication dynamics and mitigate high-field heterojunction interface issues, we propose a novel structurally modified APD that integrates a p − -type GaN multiplication layer, an n + -type GaN charge layer, and an n − -type Ga₂O₃ absorption layer. In photodetectors exhibiting low quantum efficiency at zero bias, calculating the gain based on the zero-bias photocurrent often leads to overestimation artifacts. To prevent this error and provide a rigorous physical assessment, the avalanche gain in this study is calculated relative to the average unmultiplied photocurrent in the pre-avalanche region. Simulation results demonstrate that the proposed structural modifications significantly enhance device performance. Compared to the conventional baseline, the proposed SACM-APD achieves a 93.7% enhancement in avalanche gain, increasing from 1.6 × 10 6 to 3.1 × 10 6 approximately, which corresponds to a multiplied responsivity of 1.603 × 10 6 A/W under 254 nm back-illumination. Furthermore, the operating breakdown voltage is favorably reduced from 55.55 V in the baseline to 52.77 V in the proposed structure. These findings highlight the robust potential of the proposed architecture for next-generation, high-gain single-photon avalanche detectors (SPADs).

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-13
DOI
https://doi.org/10.1038/s41598-026-79395-0
Primary Topic
Ga2O3 and related materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design and characteristics improvement of GaN/Ga₂O₃ SACM-APDs featuring a p-type GaN multiplication layer for solar-blind single-photon detection

Hassan Kaatuzian, Mohammad Hossein Khoddami
2 links
Scientific Reports
Ga2O3 and related materials
article

Design and characteristics improvement of GaN/Ga₂O₃ SACM-APDs featuring a p-type GaN multiplication layer for solar-blind single-photon detection

Hassan Kaatuzian, Mohammad Hossein Khoddami
article en

Abstract

In this paper, a separate absorption, charge, and multiplication avalanche photodiode (SACM-APD) based on a GaN/Ga₂O₃ heterostructure is designed and optimized for high-performance ultraviolet single-photon detection. First, we evaluate a conventional SACM architecture using an n − -type Gallium nitride (GaN) multiplication layer and a n + -type gallium oxide (Ga₂O₃) charge layer and an n − -type Ga₂O₃ absorption layer as a baseline. To improve carrier-multiplication dynamics and mitigate high-field heterojunction interface issues, we propose a novel structurally modified APD that integrates a p − -type GaN multiplication layer, an n + -type GaN charge layer, and an n − -type Ga₂O₃ absorption layer. In photodetectors exhibiting low quantum efficiency at zero bias, calculating the gain based on the zero-bias photocurrent often leads to overestimation artifacts. To prevent this error and provide a rigorous physical assessment, the avalanche gain in this study is calculated relative to the average unmultiplied photocurrent in the pre-avalanche region. Simulation results demonstrate that the proposed structural modifications significantly enhance device performance. Compared to the conventional baseline, the proposed SACM-APD achieves a 93.7% enhancement in avalanche gain, increasing from 1.6 × 10 6 to 3.1 × 10 6 approximately, which corresponds to a multiplied responsivity of 1.603 × 10 6 A/W under 254 nm back-illumination. Furthermore, the operating breakdown voltage is favorably reduced from 55.55 V in the baseline to 52.77 V in the proposed structure. These findings highlight the robust potential of the proposed architecture for next-generation, high-gain single-photon avalanche detectors (SPADs).

Scientific Reports
Amirkabir University of Technology (IR)
Ga2O3 and related materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon