A Fibre-Laser Powder-Bed Fusion Cell for Orbital Production of Aluminium Components: Optical, Energy and Radiator Budgets

This paper presents a computed design study, SIMULATED, NOT MEASURED, for aluminium heat-exchanger cores and lightweight structural shells in orbit, using AlSi10Mg powder, 20-63 micrometre grade. The operating principle is distinct from neighbouring production methods: a 1 kilowatt ytterbium fibre laser, delivered through a galvanometer scanner, melts successive 40 micrometre layers of aluminium powder inside a nitrogen-lean, low-pressure chamber. Unlike electron-beam processing the laser tolerates a partial gas atmosphere, which suppresses powder ejection, but aluminium reflects much of the incident light, so absorptivity rather than laser rating sets the useful throughput. Sizing follows from budgets computed in the accompanying script rather than from analogy with terrestrial equipment. The headline figures are a specific energy of 8.63 megajoules per kilogram of product, an installed electrical power of 2.8 kilowatts, a production rate of 1.17 kilograms per hour, and an annual throughput of 9.25e+03 kilograms over 330 operating days. Rejecting 1.54 kilowatts of waste heat at 330 kelvin requires 2.6 square metres of radiator, a photovoltaic supply requires 6.86 square metres of array, and the installed mass is 547 kilograms. Moving feedstock from a 400 kilometre to an 800 kilometre orbit costs 217 metres per second of velocity change. The study is a computed study with no targeting or weapon application; it concerns civilian production equipment only, and none of its figures is a measurement.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-13
DOI
https://doi.org/10.5281/zenodo.24185081
Citations
1
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
1.57
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A Fibre-Laser Powder-Bed Fusion Cell for Orbital Production of Aluminium Components: Optical, Energy and Radiator Budgets

William Alexander Aldred
1 citations
Zenodo (CERN European Organization for Nuclear Research)
Additive Manufacturing Materials and Processes
1.57
article

A Fibre-Laser Powder-Bed Fusion Cell for Orbital Production of Aluminium Components: Optical, Energy and Radiator Budgets

William Alexander Aldred
article en
1 citations

Abstract

This paper presents a computed design study, SIMULATED, NOT MEASURED, for aluminium heat-exchanger cores and lightweight structural shells in orbit, using AlSi10Mg powder, 20-63 micrometre grade. The operating principle is distinct from neighbouring production methods: a 1 kilowatt ytterbium fibre laser, delivered through a galvanometer scanner, melts successive 40 micrometre layers of aluminium powder inside a nitrogen-lean, low-pressure chamber. Unlike electron-beam processing the laser tolerates a partial gas atmosphere, which suppresses powder ejection, but aluminium reflects much of the incident light, so absorptivity rather than laser rating sets the useful throughput. Sizing follows from budgets computed in the accompanying script rather than from analogy with terrestrial equipment. The headline figures are a specific energy of 8.63 megajoules per kilogram of product, an installed electrical power of 2.8 kilowatts, a production rate of 1.17 kilograms per hour, and an annual throughput of 9.25e+03 kilograms over 330 operating days. Rejecting 1.54 kilowatts of waste heat at 330 kelvin requires 2.6 square metres of radiator, a photovoltaic supply requires 6.86 square metres of array, and the installed mass is 547 kilograms. Moving feedstock from a 400 kilometre to an 800 kilometre orbit costs 217 metres per second of velocity change. The study is a computed study with no targeting or weapon application; it concerns civilian production equipment only, and none of its figures is a measurement.

Zenodo (CERN European Organization for Nuclear Research)
Affordable and clean energy, Industry, innovation and infrastructure
Openalex Percentile: Top 25%
Additive Manufacturing Materials and Processes
1.57
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon