A Cold-Spray Deposition Unit for Orbital Repair and Coating of Aluminium Structures: Gas, Kinetic-Energy and Throughput Budgets

This paper presents a computed design study, SIMULATED, NOT MEASURED, for restored sealing faces, conductive coatings and repaired panels in orbit, using aluminium and copper powder, 15-45 micrometre grade. The operating principle is distinct from neighbouring production methods: heated nitrogen expands through a de Laval nozzle to supersonic speed and carries powder particles that bond on impact by severe plastic deformation, without ever melting. Because the feedstock stays solid, oxidation and thermal distortion are largely avoided, and the process suits repair of parts that cannot tolerate a melt pool. The energy ledger is dominated by gas heating and compression, not by any phase change. Sizing follows from budgets computed in the accompanying script rather than from analogy with terrestrial equipment. The headline figures are a specific energy of 2.49 megajoules per kilogram of product, an installed electrical power of 4.5 kilowatts, a production rate of 6.51 kilograms per hour, and an annual throughput of 5.16e+04 kilograms over 330 operating days. Rejecting 2.48 kilowatts of waste heat at 320 kelvin requires 4.73 square metres of radiator, a photovoltaic supply requires 11 square metres of array, and the installed mass is 453 kilograms. Moving feedstock from a 400 kilometre to an 800 kilometre orbit costs 217 metres per second of velocity change. The study is a computed study with no targeting or weapon application; it concerns civilian production equipment only, and none of its figures is a measurement.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-13
DOI
https://doi.org/10.5281/zenodo.24184985
Citations
1
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
1.57
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A Cold-Spray Deposition Unit for Orbital Repair and Coating of Aluminium Structures: Gas, Kinetic-Energy and Throughput Budgets

William Alexander Aldred
1 citations
Zenodo (CERN European Organization for Nuclear Research)
Additive Manufacturing Materials and Processes
1.57
article

A Cold-Spray Deposition Unit for Orbital Repair and Coating of Aluminium Structures: Gas, Kinetic-Energy and Throughput Budgets

William Alexander Aldred
article en
1 citations

Abstract

This paper presents a computed design study, SIMULATED, NOT MEASURED, for restored sealing faces, conductive coatings and repaired panels in orbit, using aluminium and copper powder, 15-45 micrometre grade. The operating principle is distinct from neighbouring production methods: heated nitrogen expands through a de Laval nozzle to supersonic speed and carries powder particles that bond on impact by severe plastic deformation, without ever melting. Because the feedstock stays solid, oxidation and thermal distortion are largely avoided, and the process suits repair of parts that cannot tolerate a melt pool. The energy ledger is dominated by gas heating and compression, not by any phase change. Sizing follows from budgets computed in the accompanying script rather than from analogy with terrestrial equipment. The headline figures are a specific energy of 2.49 megajoules per kilogram of product, an installed electrical power of 4.5 kilowatts, a production rate of 6.51 kilograms per hour, and an annual throughput of 5.16e+04 kilograms over 330 operating days. Rejecting 2.48 kilowatts of waste heat at 320 kelvin requires 4.73 square metres of radiator, a photovoltaic supply requires 11 square metres of array, and the installed mass is 453 kilograms. Moving feedstock from a 400 kilometre to an 800 kilometre orbit costs 217 metres per second of velocity change. The study is a computed study with no targeting or weapon application; it concerns civilian production equipment only, and none of its figures is a measurement.

Zenodo (CERN European Organization for Nuclear Research)
Industry, innovation and infrastructure, Responsible consumption and production
Openalex Percentile: Top 25%
Additive Manufacturing Materials and Processes
1.57
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon