A Tether-Stabilised Formation Interferometer: Baseline Stability, Gravity-Gradient Tension and Reconfiguration Budgets
This study sizes the system named in its title from stated physical relations and a stated operating basis, and reports the result as SIMULATED, NOT MEASURED. The operating principle is three spacecraft held on tethers in a gravity-gradient-stabilised formation to maintain an optical baseline. The interferometer is a civilian astronomy instrument intended to image stars and planetary systems by optical interferometry; it carries no payload other than telescopes, metrology equipment and communications systems. Every performance figure is computed by the deposited script from its inputs rather than asserted, and the headline outcomes include gravity-gradient tether tension per long baseline of 0.65 newtons; ratio of restoring torque to the disturbance torque budget of 3463.5; time to change a baseline by the stated amount of 1.39 hours; optical path drift from tether thermal expansion over the stated swing of 88 millimetres. Mass, power, time and energy budgets are assembled from components so they can be audited line by line, off-design behaviour is discussed openly, and the limits of the sizing are stated in full. The design is presented as a civilian system throughout, with its governing constraint identified and quantified rather than merely encountered.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-14
- DOI
- https://doi.org/10.5281/zenodo.24209521
- Primary Topic
- Space Satellite Systems and Control
- Type
- article
- Field-Weighted Citation Impact
- 0.00