Multi-Response Optimization of Abrasive Water Jet Machining of Low-Carbon Steel Using Grey Relational Analysis

This study investigates the multi-response optimization of abrasive water jet machining (AWJM) of lowcarbon steel using grey relational analysis (GRA).A two-level full factorial design supplemented with three centre-point runs was employed, comprising eleven experiments.Water pressure, traverse speed, and stand-off distance were investigated within ranges of 270-310 MPa, 400-600 mm/min, and 3-5 mm, respectively.Material removal rate (MRR) and surface roughness (SR) were selected as performance responses, aiming to maximize MRR and minimize SR.The responses were normalized, and grey relational grades were calculated using equal response weights and a distinguishing coefficient of 0.5.Experiment 4 achieved the highest grey relational grade of 1.000 at 310 MPa, 600 mm/min, and 3 mm, producing the highest observed MRR of 25.57 and the lowest observed SR of 0.72 μm.Analysis of the mean grey relational grades identified A3B1C1, corresponding to 310 MPa, 400 mm/min, and 3 mm, as the preferred combination based on factor-level averages.Thus, A3B1C1 represents the combination selected from marginal means, while Experiment 4 remains the best observed experimental run.

Authors

Institutions

Publication Details

Journal
IARJSET
Published
2026-11-12
DOI
https://doi.org/10.17148/iarjset.2026.131148
Primary Topic
Erosion and Abrasive Machining
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Multi-Response Optimization of Abrasive Water Jet Machining of Low-Carbon Steel Using Grey Relational Analysis

Nagwa Mejid Ibrahim Elsiti, Moneer Fouzi El-skandrany
IARJSET
Erosion and Abrasive Machining
article

Multi-Response Optimization of Abrasive Water Jet Machining of Low-Carbon Steel Using Grey Relational Analysis

Nagwa Mejid Ibrahim Elsiti, Moneer Fouzi El-skandrany
article en

Abstract

This study investigates the multi-response optimization of abrasive water jet machining (AWJM) of lowcarbon steel using grey relational analysis (GRA).A two-level full factorial design supplemented with three centre-point runs was employed, comprising eleven experiments.Water pressure, traverse speed, and stand-off distance were investigated within ranges of 270-310 MPa, 400-600 mm/min, and 3-5 mm, respectively.Material removal rate (MRR) and surface roughness (SR) were selected as performance responses, aiming to maximize MRR and minimize SR.The responses were normalized, and grey relational grades were calculated using equal response weights and a distinguishing coefficient of 0.5.Experiment 4 achieved the highest grey relational grade of 1.000 at 310 MPa, 600 mm/min, and 3 mm, producing the highest observed MRR of 25.57 and the lowest observed SR of 0.72 μm.Analysis of the mean grey relational grades identified A3B1C1, corresponding to 310 MPa, 400 mm/min, and 3 mm, as the preferred combination based on factor-level averages.Thus, A3B1C1 represents the combination selected from marginal means, while Experiment 4 remains the best observed experimental run.

IARJSETVol. 13(11)
University of Benghazi (LY)
Erosion and Abrasive Machining
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon