Flexible Form-Stable Phase Change Materials with a Thermally Conductive Network Constructed by Differently Sized Expanded Graphite for Thermal Interface Applications

Abstract Growing demands for high power density and miniaturization in electronic devices require high-performance thermal interface materials that can lower the interfacial thermal contact resistance (TCR) and enable efficient thermal management of flexible electronics. Herein, flexible form-stable phase change materials (FCPCMs) were developed using paraffin wax (PW) as the phase change energy storage unit and a styrene–ethylene/butylene–styrene block copolymer (SEBS) to construct a three-dimensional crosslinked network; an organic peroxide (BIPB) initiated the crosslinking reaction to stabilize the structure, ensuring that the FCPCMs retain good shape stability and leakage resistance above the phase change temperature. Expanded graphite (EG) and ultrasonicated expanded graphite (UEG) were further introduced to synergistically construct thermally conductive channels and thereby enhance the thermal conductivity of the FCPCMs. The optimal FCPCM achieved a thermal conductivity of 2.39 W/(m·K), 8.24 times that of PW. The prepared FCPCMs showed no obvious decay in phase change temperature or latent heat after 200 cycles, demonstrating good thermal reliability and cycling stability. In addition, owing to the crosslinked network, the material exhibits self-healing and adaptive capabilities upon heating and can effectively fill microscopic defects. In a chip heat dissipation test, combining the material with a heat sink lowered the chip surface temperature at 12 W from 132.9 °C to 68.7 °C (a reduction of 48.3%) and reduced the surface temperature difference from 14.5 °C to 2.1 °C (a reduction of 85.5%) relative to the blank group, demonstrating excellent thermal management performance. This effectively suppressed thermal contact resistance and provided an approach to chip thermal management.

Authors

Institutions

Publication Details

Journal
ACS Applied Energy Materials
Published
2026-11-13
DOI
https://doi.org/10.1021/acsaem.6c02932
Primary Topic
Phase Change Materials Research
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Flexible Form-Stable Phase Change Materials with a Thermally Conductive Network Constructed by Differently Sized Expanded Graphite for Thermal Interface Applications

Yuan Ren, Hui Qi, Xuan Lei, Yunfei Wang et al.
4 links
ACS Applied Energy Materials
Phase Change Materials Research
article

Flexible Form-Stable Phase Change Materials with a Thermally Conductive Network Constructed by Differently Sized Expanded Graphite for Thermal Interface Applications

Yuan Ren, Hui Qi, Xuan Lei, Yunfei Wang, Xiaobo Xue, Lei Gao, Jian Wang
article en

Abstract

Abstract Growing demands for high power density and miniaturization in electronic devices require high-performance thermal interface materials that can lower the interfacial thermal contact resistance (TCR) and enable efficient thermal management of flexible electronics. Herein, flexible form-stable phase change materials (FCPCMs) were developed using paraffin wax (PW) as the phase change energy storage unit and a styrene–ethylene/butylene–styrene block copolymer (SEBS) to construct a three-dimensional crosslinked network; an organic peroxide (BIPB) initiated the crosslinking reaction to stabilize the structure, ensuring that the FCPCMs retain good shape stability and leakage resistance above the phase change temperature. Expanded graphite (EG) and ultrasonicated expanded graphite (UEG) were further introduced to synergistically construct thermally conductive channels and thereby enhance the thermal conductivity of the FCPCMs. The optimal FCPCM achieved a thermal conductivity of 2.39 W/(m·K), 8.24 times that of PW. The prepared FCPCMs showed no obvious decay in phase change temperature or latent heat after 200 cycles, demonstrating good thermal reliability and cycling stability. In addition, owing to the crosslinked network, the material exhibits self-healing and adaptive capabilities upon heating and can effectively fill microscopic defects. In a chip heat dissipation test, combining the material with a heat sink lowered the chip surface temperature at 12 W from 132.9 °C to 68.7 °C (a reduction of 48.3%) and reduced the surface temperature difference from 14.5 °C to 2.1 °C (a reduction of 85.5%) relative to the blank group, demonstrating excellent thermal management performance. This effectively suppressed thermal contact resistance and provided an approach to chip thermal management.

ACS Applied Energy Materials
Inner Mongolia University of Science and Technology (CN)
National Natural Science Foundation of China, Natural Science Foundation of Inner Mongolia, Science and Technology Major Project of Inner Mongolia
Phase Change Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon